Replacement For Key Fob on Powered Retrax Tonneau Cover

Question

Question:

I bought a used truck that has the motorized Retrax Tonneau. Problem is, there was no remote included with the truck when I bought it. I am stuck with no way to open the tonneau. I have a 2019 Ford F250. The serial number on the cover is T-82383. Will this part fix my problem with this Retrax tonneau? Thank you

asked by: SHAWN B

0

Expert Reply:

Hey Shawn,

I reached out to Retrax for you and they confirmed that since you already have the receiver you'll just need the replacement key fob to get it working again. The correct part number for that is the following:

- Replacement Key Fob - Powertrax Retractable Tonneau Covers - Serial Number 1701 or Higher # RTX36TR

expert reply by: Kyle S

0

Answer 1

It might David but I have no way of knowing for sure without that serial number. The Replacement Key Fob item #RTX36TR matches up with covers that have a serial number of 1701 or higher. There's no other way to identify if this is the one you…

view full answer...

Answer 2

Hey David, yes the Replacement Key Fob #RTX36TR that you referenced does come with instructions but if you have any issues pairing it comment below and I'll do my best to help.

view full answer...

Answer 3

Hey Ian, thanks for reaching out. Without the serial number there is no way to know for sure which fob will work for your cover. The Replacement Key Fob item #RTX36TR matches up with covers that have a serial number of 1701 or higher. It doesn't…

view full answer...

Answer 4

Hey William, did you check the serial number of your cover yet? If the number is higher than 1701 the replacement remote part #RTX36TR is correct for it. I attached a picture that shows where you'll find the number.

view full answer...

Answer 5

Hi Cody; to reprogram the Replacement Key Fob - Powertrax Retractable Tonneau Covers - Serial Number 1701 or Higher #RTX36TR follow these steps: 1. Disconnect power to the cover’s receiver for about 2 minutes so it resets. 2. Reconnect power to the…

view full answer...

Answer 6

Yes, I can help you out with a new remote receiver for your Retrax cover on your 2021 GMC Sierra. - Replacement Remote Receiver for Retrax Powered Retractable Tonneau Covers #RTX89TR The Replacement Remote Receiver for Retrax Powered Retractable…

view full answer...

Answer 7

Hello Lane, I reached out to my contact at Retrax, he informed me that the receiver that you have has been discontinued so you would not be able to get just the Replacement Key Fob #RTX36TR. Instead you will need to get a new power lock assembly. I…

view full answer...

Answer 8

Hey Andre, yes the replacement FOB part #RTX36TR is correct for your Retrax key FOB for yours based on the serial number.

view full answer...

Answer 9

No, the PowertraxPRO XR Hard Tonneau Cover w/ Trax Rails - Powered #RTT-90852 can not be used manually according to my contact at Retrax. It can only be used utilizing the electric motor. Since you are concerned about ice build up and access without…

view full answer...

Answer 10

I spoke to my contact at Retrax and they informed me that there is no manual release on the PowertraxONE MX Hard Tonneau Cover part #RT70243 for your 2019 Ram 1500 if you were to lose power to the motor. However, we do have a powered retractable…

view full answer...

Answer 11

Hey thanks for reaching out, Jeremy. It does not sound like a motor issue since the cover can open and close normally. This is a problem with the remote or with the receiver. The only fix for this is a replacement. The Replacement Remote Receiver for…

view full answer...

Answer 12

Hello Lonnie. If your cover did not come with a remote, you will need to replace the receiver. Based on your model number 4100-017, the correct remote receiver kit would be part #RTX89TR.

view full answer...

Replacement For Key Fob on Powered Retrax Tonneau Cover

Continue Researching