Can The Exterior Pop-Up Roof Vent # 9106 Fit On A Freightliner Columbia Sleep Cab
Updated 01/05/2026 | Published 09/26/2024
Products Featured in This Question
Question:
Hi team I wanna know if this item can fix in the sleeper vent of freightliner columbia? I attached a picture where I wanna install. Thanks
asked by: Javier M
(click to enlarge)
Expert Reply:
Hey Javier,
The Replacement Exterior Pop-Up Roof Vent # 9106 could potentially work but you'll want to take some measurements first to confirm. This vent requires a 11-1/8" long x 5-1/2" wide cutout hole. The overall dimensions are 13-1/2" long x 8" wide so you'll also need to verify that this will work with any other accessories mounted to the roof. If comes with a gasket to prevent water from leaking in but I'd highly recommend putting a healthy glob of self-leveling sealant # 34427034145-1 over the mounting screws and outer edge of the mounting flange to help prevent water leaks further. For the inside trim ring you'll want part # 2756.
(click to enlarge)
Product Page this Question was Asked From
Replacement Exterior Pop-Up Roof Vent - Steel - 13-1/2" x 8" - Black
- RV Vents and Fans
- Vent
- Roof Vent
- Manual Lift
- No Fan
- Metal
- Black
- Redline
more information >
Continue Researching
- Video: An In-Depth Look at the Bauer Products Divider Latch for Horse Trailers
- Shop: Replacement Ceiling Garnish for Redline 2-Way Pop-Up Roof Vent - Black
- Shop: Replacement Exterior Pop-Up Roof Vent - Steel - 13-1/2" x 8" - Black
- Shop: Redline 2-Way Pop-Up Roof Vent with Garnish for Enclosed Trailers - Steel
- Shop: Replacement Exterior Pop-Up Roof Vent - Aluminum - 13-1/2" x 8"
- Shop: Bauer Products Divider Latch for Horse Trailers - Spring Loaded - Right Hand - Matte Black
- Shop: Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Zinc Plated Steel
- Shop: Redline 2-Way Pop-Up Roof Vent with Garnish for Enclosed Trailers - Aluminum
- Q&A: Dimensions of Redline Replacement Exterior Pop-Up Roof Vent
- Q&A: Side Wall Vent Recommendation for an Enclosed Trailer for Maximum Air Flow
- Q&A: What is Usable Span of Coupler Pin - 1/4" Diameter x 3" Long # 37201281
- Q&A: How Does the Pipe Attach to the Cam Lock Assembly on Polar 658-002?
- Q&A: Can an AC be Installed on a 14x7 Utility Trailer?
- Q&A: Depth of the Redline Garnish part # 2756
- Q&A: Can The Solera Awning Cradle Support LC289373 Be Used On Awning With Metal Weather Shield?
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Motorhome Steps
- Article: The Ultimate RV Camping Checklist for Your First Year RVing
- Article: Converting Your RV Water Heater to Tankless
- Article: Performance Chips and Modules
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Jesse M.
1/5/2026
Hey Javier, did the measurements for your Freightliner Columbia’s sleeper vent line up with the pop-up roof vent? Your update could make it easier for the next person working on a similar setup.