Does Draw-Tite Trailer Hitch 76134 Fit 2018 Toyota RAV4 Hybrid

Question

Question:

Will this fit a 2018 Toyota Rav4 hybrid?

asked by: Warren B

0

Expert Reply:

Hi Warren,

Yep, it sure will; your 2018 Toyota RAV4 hybrid is 100% compatible with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76134.

I have added a photo below a previous customers was nice enough to share that shows the # 76134 installed on their '18 RAV4 hybrid so you can see how it'll look.

And just in the interest of being thorough, if you plan on doing some towing and also need a 4-way wiring harness, the correct option for your RAV4 is the T-One Vehicle Wiring Harness # 118578.

expert reply by: Kyle S

0

Hitch 76134 on 2018 Toyota RAV4 Hybrid
(click to enlarge)

Jerred H.

1/5/2026

Hey Warren, how did the Draw-Tite hitch work out on your RAV4 hybrid? Did the fit and look match what you expected from the photo? Your feedback could help others setting up the same vehicle.

Answer 1

For your 2018 Toyota RAV4 we have Class II hitches that have 1-1/4 inch openings like the Curt #C12108 and we have what I recommend the Class III 2 inch hitches like the etrailer.com hitch part #E98864. The two attached pictures show either size. The…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 8

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 9

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 10

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 11

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 12

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Does Draw-Tite Trailer Hitch 76134 Fit 2018 Toyota RAV4 Hybrid

Continue Researching