Recommended Hellwig End Link Kits for a 2023 Forest River Sunseeker 2860

Question

Question:

looking for end links for a 2023 sunseeker 2860 classic on E450 cutaway chassis. The rear sway-bar is a hellwig sway bar, and i need the end links, which i cannot find here or the hellwig site. any help would be appropriated.

asked by: Patrick S

0

Expert Reply:

Hey Patrick, it sounds like you're looking for the Hellwig Universal Straight End Link Kit # HE64SR. This kit is universal and can be adjusted from 6" to 8" long.

If you needed them longer, we also have # HE74SR for 8" to 11", # HE25FR for 11" to 14", and # HE24SR for 14" to 17".

expert reply by: Bryce D

0

Robin H.

1/5/2026

Hey Patrick, how did the end link kit work out with the Hellwig sway bar on your Sunseeker? Knowing which length fit best could really help others trying to match their setup.

Answer 1

For your 2002 Ford Excursion I recommend going with Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL57132 for the rear. If you happen to have a snow plow or some other heavy item on the front, then you can also get the front setup as well…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 6

This all makes perfect sense Clinton, and you gave really good detail. Here's the good news, you can absolutely upgrade from your 13k BTU unit to a 15k BTU unit with no issues. Both sizes use the same standard roof opening, so it’s a…

view full answer...

Answer 7

Good afternoon James, yes the Stillwell jacks are made in the great United States of America! (see flag below). In regard to how they compare to other brands, they are going to be similar to the Dexter jacks we carry. The dexter will be just a little…

view full answer...

Answer 8

Hey Ronald, for your 2021 Jayco Greyhawk 27U that is built on a Ford E-450 Class C chassis the Hellwig front sway bar part #HE26GR is a confirmed and would be a great option to improve the handling of your motorhome. I am sorry it's not listed in…

view full answer...

Recommended Hellwig End Link Kits for a 2023 Forest River Sunseeker 2860

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching