Trailer Hitch, Wiring, & Brake Controller For 2019 Jeep Grand Cherokee Limited
Updated 01/05/2026 | Published 09/16/2024
Products Featured in This Question
Question:
Good evening, Im looking to have a trailer hitch installed on my 2019 Jeep Grand Cherokee Limited X without factory tow package. With not many helpful hitch installers in my area, I have a few questions. - Do you have a Class III or IV hitch that recieves through the bumper cutout on my vehicle instead of below the bumper? - If you do have said hitch, are there any with brackets and whatnot for the 4pole and 7pole connectors? - Considering I have no factory tow package, which wiring harness would I be looking for for my vehicle to pull a trailer with a 7pole connector? - And finally, the trailer Im looking to pull has trailer brakes, so I would also be looking for a trailer brake controller. Thanks in advance, Logan
asked by: Logan R
Expert Reply:
Hey Logan,
I can definitely help you out here and we do indeed have a hitch for your Jeep Grand Cherokee Limited which fits through the OEM fascia panel on your Jeep instead of being under the bumper. What you'd need for that is the following:
- Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR
This is a Class IV hitch with a 7,500 lb towing capacity and even has a tab that allows you to mount the bracket for the trailer wiring. Speaking of that, we do have the wiring that will allow you to use a brake controller, and you'll simply need the following:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C62VR
- Universal Installation Kit for Trailer Brake Controller # ETBC7
You will first install the 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way that comes with the # ETBC7, which also gives you the wiring, circuit breakers, bracket, and rest of the hardware needed for installation. Then for a brake controller, I highly recommend checking out the most reliable option, the Tekonsha Prodigy P3 # 90195.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Hitch for a 2021 Jeep Grand Cherokee Laredo X
- Article: Trailer Wiring Diagrams
- Q&A: Curt T-Connector Wiring Harness Taillight Connectors On a 2021 Jeep Grand Cherokee
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Wiring Harness for a 2018 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Hidden Hitch & Trailer Wiring For 2019 Jeep Grand Cherokee
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will Curt Wiring Harness Require Activating Circuits at Dealer on 2018 Jeep Grand Cherokee
- Article: What Do I Need To Tow A Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
Jesse M.
1/5/2026
Hey Logan, how did the setup go with the Draw-Tite hitch and the Curt wiring harness on your Grand Cherokee? Were you able to get everything working with the Prodigy P3 brake controller? Your update could make it easier for others planning a similar towing setup.