What Vehicles Will The Draw-Tite Hitch DT87MR Fit?

Question

Question:

This says it only first 2020+ cayenne coupe, but I believe the 2019 and up cayenne suv is the same frame. Is there a reason why this only fits the coupe body style and not the traditional suv?

asked by: Tyler

0

Expert Reply:

Hello Tyler, thanks for reaching out. The # DT87MR hitch will not fit a 2019 Porche Cayenne Coupe. The 2019 Cayanne SUV does have some differences in the frame so the hitch for the SUV will not be cross compatible with the coupe. According to Draw-Tite, the # DT87MR hitch only fits the following vehicles:

- 2020 - 2024 Porsche Cayenne Coupe

I am sorry to say that we do not offer a hitch for the 2019 Porche Cayanne Coupe at this time.

expert reply by: Jesse M

0

Jesse M.

1/5/2026

Hey Tyler, were you able to find a hitch that works for your 2019 Cayenne Coupe? Knowing what solution you found could help others trying to fit a hitch on the same model.

Answer 1

With your 2021 Porsche Cayenne being the SUV style your only option are going to be the Stealth Hitches #SH37FR or their version with the Towing Kit #SH37FRT. The Draw-Tite #DT87MR you found will only fit on the Coupe models.

view full answer...

Answer 2

Good question, and the Draw-Tite Max-Frame Trailer Hitch Receiver #DT87MR is only a fit for the 2021 Porsche Cayenne Coupe, so it does NOT fit the SUV. If you have the SUV and not the Coupe, there is still a hitch that fits your Cayenne, the Stealth…

view full answer...

Answer 3

As far as the easiest hitch to install on a 2021 Porsche Cayenne, unfortunately all of our hitches require bumper removal, wheel well removal, and fascia trimming on your vehicle. However, with that being said, for less area to cut, the Draw-Tite -…

view full answer...

Answer 4

For a hitch that fits your 2019 Porsche Cayenne that has more than enough capacity for a 5,000 lb boat we have the Stealth hitch part #SH37FRT which is rated for 8,000 lbs trailer weight. We've not heard of any issues with the hitch fits and…

view full answer...

Answer 5

Hey Richard, The Curt Trailer Hitch Receiver #C75ZV is listed as a fit for all models of the 2023 Porsche Cayenne. They don't have a note about the center exhaust on some models being an issue but I think you'll probably find the receiver…

view full answer...

Answer 6

The Stealth Hitches Hidden Rack Receiver #SH37FR you were looking at is indeed confirmed to fit your 2019 Porsche Cayenne Hybrid. You will need to trim a small portion of the underside fascia to give the receiver a location to be exposed. This is not…

view full answer...

Answer 7

Hey Kohlmann, thanks for reaching out! For whatever reason most trailer hitch manufacturers don't have a fit for your 2019 Porsche Cayenne - the only one that will fit is the Stealth Hitches Hidden Rack Receiver #SH37FR. The Draw-Tite and Curt…

view full answer...

Answer 8

When installing the #SH37FR on a 2019 Porsche Cayenne, there will be enough slack in the wiring harness mentioned in step #14 of the instructions so that the hitch can be slid into place. The procedure for removing the hatch/trunk release cable from…

view full answer...

Answer 9

For your 2021 Porsche Cayenne I recommend the Stealth Hitches Hidden Rack Receiver #SH37FR which is confirmed to fit whether you have the coupe or suv. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a…

view full answer...

Answer 10

Hey David, You're correct that that much weight would put a lot of strain on your Porsche and could lead to a lot of sway. Since the Stealth Hitches #SH37FRT wouldn't be able to physically connect to a weight distribution hitch or any other…

view full answer...

Answer 11

John, if you don't plan on towing with your Porsche then you can just use the Stealth Hitches Hidden Rack Receiver #SH37FR. This hitch has an included 2" receiver attachment you can use for your bikes, and has a max weight capacity of 600…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Vehicles Will The Draw-Tite Hitch DT87MR Fit?

Continue Researching