Pre Packed Hub To Replace Triton Part 02884 And 07994-P
Updated 01/12/2026 | Published 09/04/2024
Products Featured in This Question
Question:
Hello, I have a 2007 Triton Elite WcII Jet ski trailer. I am looking for two prepacked wheel hub assemblys. Triton gave me the P/N 07994-P for the bearing kit and 02884 for the hub. Do you have anything that would fit this axle? I also need two tires, 18.5 x 8.5. Thanks
asked by: Logan H
Expert Reply:
Hello Logan, thanks for reaching out. Our records show the Triton P/N 07994-P comes with two # L44649 bearings and a 1-1/16" straight spindle. The shows up as a 5 lug idler hub.
We do have a pre packed hub that is a match for this. Take a look at the CE Smith Trailer Hub Assembly # CE13311. This is a 5 on 4-1/2" hub and it comes pre-greased in a carrying case.
The best option we have for the 18x8.50-8 tires is the Kenda K389 Hole-N-1 Bias Golf Cart Tire part # AM40537. This comes with a two year warranty and 65 mph speed rating. These tires have a load range b rating which is sufficient for up to 815 lbs.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Redline
more information >
Continue Researching
- Search Results: bk1 150 bearing kit
- Video: Trailer Idler Hub Assembly for 2,000-lb Axles Spec Review
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: Recommended Hub w/ a 5 on 4-1/2" Bolt Pattern that Fits a BTR Spindle w/ L44649 Bearings
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Brake Controller
- Search Results: trailer jack
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer hubs and drums
on Trailer Hubs and Drums
Jesse M.
1/12/2026
Hey Logan, how did the CE Smith pre-packed hubs and Kenda tires work out on your Triton trailer? Your update could make it easier for the next person matching parts for a similar setup.