Does MORryde RV Door Latch Extender Make it Hard to Get Key Into Lock

Question

Question:

Does the latch extender make it harder to get the key into the latch lock?

asked by: Brian S

0

Expert Reply:

Hi Brian,

That's a really good question, but using the MORryde RV Door Latch Extender # MR22JR won't interfere with your door's lock. It's off to the side of the locks so you'll still be able to use your keys without issue.

expert reply by: Kyle S

0

Brian

9/3/2024

Thanks, Kyle.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Martyn, For your 2020 Keystone Cougar 27SGS Half Ton with the 3 step MORryde step unit, the correct option you’ll want is the MORryde Safe T Rail Telescoping Handrail part #MR54BR. This model is designed to mount to the flat fiberglass exterior…

view full answer...

Answer 6

Hi Brian! I would not try to repair a 14 year old AC. It is typically more cost effective to replace the system, and you may not even be able to get parts depending on what went wrong. R410A units have been phased out as of last year because of EPA…

view full answer...

Answer 7

What you have is a Heng's Vortex Add On Fan. This fan was put in to replace the smaller Ventline fan that originally came on your camper. I recommend installing a MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933066 over your vent lid.…

view full answer...

Answer 8

Hey Mike! Since the ceiling controls on the #CM43RR would be too high to reach you can use the Coleman-Mach Signature Mach 15 RV Air Conditioner System #CM32RR with the wall thermostat. This is the ducted version, but the AC itself is the same with…

view full answer...

Answer 9

Hey Dan, welcome back! I'm assuming this is for the same 2025 you asked about before. The Safe-T-Plus Steering Stabilizer #ST98MR is what you need. This is designed to fit a Class C E-450 and comes with the custom mounting brackets. How are you…

view full answer...

Answer 10

The note might not be there for the Camco Premium Locking Wheel Stop w/ Ratchet Wrench #CAM44662, but the function is the same as the Stromberg Carlson Chock Wheel Stabilizer for Tandem-Axle Trailers and RVs #SC97MR. Both of these items are designed…

view full answer...

Answer 11

For your application I would recommend the Super Springs part #SSR-101-47-2 as it is designed for heavy loads carried in the truck bed like your 3,000 lb camper and because it is also works very well to reduce the sway that you have as well. This…

view full answer...

Answer 12

Hey Paul, thanks for reaching out. The MORryde GooseTech 5th Wheel to Gooseneck Pin Box is designed to match the height and length profile of the original pin box it replaces, so the overall dimension from the top of the pin box housing down to the…

view full answer...

Does MORryde RV Door Latch Extender Make it Hard to Get Key Into Lock

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching