Availability of Aftermarket Hitch that Fits 2024 Chevy Traverse

Question

Question:

Can I add an aftermarket trailer hitch to a 2024 Chevrolet Traverse LT AWD New body style Thanks!

asked by: Joe

0

Expert Reply:

Hey Joe, we do have the Curt hitch part # C97RV that is a confirmed fit for your 2024 Chevy Traverse LT AWD.

expert reply by: Jameson C

0

Jim R.

9/26/2024

Will the OEM plastic cover be able to be used to hide the receiver after it is installed when it is not being used?

Jameson C.

9/26/2024

@JimR Yes it will.

Answer 1

Hey Dennis, thanks for reaching out. Yes we do have a braket for attaching the 4-flat plug to the car. For that I recommend the following: - Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR What most people do it use self-tapping screws…

view full answer...

Answer 2

Hello Josie, thanks for reaching out. The Curt Trailer Hitch Receiver #C97RV will add 41 lbs to the vehicle.

view full answer...

Answer 3

Hi Dan, There is a 4-way wiring harness for your 2025 Buick Enclave to go with the Curt Trailer Hitch Receiver #C97RV. The correct fit for that is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C66RV.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Availability of Aftermarket Hitch that Fits 2024 Chevy Traverse

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching