Is There Suspension Enhancement that Fits 2019 Ram 3500 with Timbren Kit Installed

Question

Question:

I currently run Timbren Severe service on my 2019 Ram 3500 when loaded with 4000 pound camper. Is there a air bag system that can be used in conjunction with the timbren? 2019 Ram 3500, long bed, srw, Laramie, 4x4

asked by: Ron

0

Expert Reply:

I have a solution for you Ron, but the Timbrens you have now would interfere with all of the air bag kits as they both need to install in the same area.

Instead you'd want to go with the Roadactive kit part # RAS3613-HD which will give you the support you are looking for but won't interfere with the Timbrens at all.

expert reply by: Jameson C

0

Jameson C.

1/27/2026

Hey Ron, how did the RoadActive Suspension kit work out on your Ram 3500 with the camper load? Your update could make it easier for the next person trying to balance heavy cargo support.

Answer 1

For your 2019 Ram 3500 Dually Diesel I recommend the Timbren Rear Suspension Enhancement System #TDR3500CA. This jounce spring system is rated for up to 8,600 lbs and will progressively support your load by getting more rigid as more weight is added.…

view full answer...

Answer 2

I have the perfect solution for your 2019 Ram 3500 for suspension enhancement. The Timbren kit part #TDR3500CA which is a custom fit for your truck gives you all the support you need without ever having to worry about air bag pressure or air leaks…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Is There Suspension Enhancement that Fits 2019 Ram 3500 with Timbren Kit Installed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching