D-ring Kit for BedSlide Sliding Truck Bed Tray

Question

Question:

I just bought a bed slide. 4 D-rings came with it. I would like to purchase 4 more of those rings. Thanks for any help, Max

asked by: Max H

0

Expert Reply:

Max, for your BedSlide Sliding Truck Bed Tray # BE35ER you can use the D-Ring Tie-Down Kit for BedSlide Truck Bed Trays # BE87WR.

expert reply by: Bryce D

0

Max

8/28/2024

Thanks Bryce

Bryce D.

8/28/2024

@Max Anytime, Max.

Answer 1

Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…

view full answer...

Answer 2

Hey Steve, great question! The magnets on the BTBRV Magnetic Hitch Receiver Reducer Sleeve #BTBRV64FR are strong enough to keep this from happening. They will keep it secure in your 2-1/2" receiver so you don't have to worry about it sliding…

view full answer...

Answer 3

Hey Sam! Yes, the BTBRV Magnetic Hitch Receiver Reducer Set #BTBRV39FR can be used for weight distribution. The reducer sleeves do not cause any kind of reduction in capacity so it is perfectly fine to use with your WDH shank. What kind of trailer…

view full answer...

Answer 4

I do have an option for you but I can't recommend modifying the MORryde RV Cargo Sliding Trays like part #MR47FR. I'm sure you could make them work for you but I can't really offer any assistance with this. That said, we have a much…

view full answer...

Answer 5

The overall height of the Valterra RV Screen Door Push Bar #VA47ZR that you referenced is 1-1/2 inches so unless you didn't measure right you'd be short 3/8 of an inch for it to clear.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

D-ring Kit for BedSlide Sliding Truck Bed Tray

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching