Brake Controller that Fits 2024 Motorhome on E350 Cutaway Chassis

Question

Question:

I have a 2024 motor home on a e ford 350 chassis trying to ha a electric brake control I think it might already have a factory wiring harness but I’m not sure it does have both kinds of wires in the back for plug-in a trailer in any ideas thanks

asked by: Paul S

0

Expert Reply:

Hey Paul, so your 2024 motorhome built on a Ford Cutaway chassis does have a 7-way at the rear and brake controller install wiring under the dash so all you'd need is the part # TK99UR which comes with the P3 brake controller and the correct custom wiring for your motorhome.

expert reply by: Jameson C

0

Paul S.

8/20/2024

So every thing just plugs in no wiring nuts or what ever they are called also is everything done inside the cab once that is hooked up it works everything from there

Jameson C.

8/20/2024

@PaulS Correct, it's plug and play basically.

Paul S.

8/20/2024

@JamesonC ok so the one harness that it shows the bare wires is not the one I use there is a different one that comes with it with plug on both ends

Jameson C.

8/20/2024

@PaulS Yes it comes with a separate harness custom fit for your RV. I know it's goofy since it's a single part number but it's a kit that includes the controller and the correct harness.

See All (11) Replies to Paul S. ∨

Dennis

9/7/2024

When i call E-Trailer they tell me they have no brake control for a 2024 E-350 Cutaway. I have had a voyager control installed by a local UTEC & the trailer brakes will not engage. Can you let me know if the recommendation above will work in my application. Thanks Dennis.

Jameson C.

9/8/2024

@Dennis Yes it does fit and would work great.

Dennis

9/9/2024

Thanks, I finally got my situation resolved. If possible, i would like to speak with you & pass on the information to possibly help others. Thanks

Jameson C.

9/9/2024

@Dennis I don't have a phone at my desk so I can't take work calls. If it's not overly complicated to explain it would be great if you could comment back with what you experienced.

See All (5) Replies to Dennis ∨

Matt 1.

3/31/2025

Does this controller work as a plug and play for the 2025 as well? It is a E-350 Cutaway SRW. It has Tow/Haul but no brake controller installed.

Jameson C.

3/31/2025

@Matt1 Yes it would.

Answer 1

Hello Erik, thanks for reaching out. According to my research, the Furrion Chill 8K FACR08HESA2-PS is for a ducted AC system, so you will need the ducted Chill Cube unit to replace it. That said, you will need a complete AC package that comes with…

view full answer...

Answer 2

Hey Matt, thanks for reaching out! Yes, the Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness #TK99UR comes with the correct adapter harness to get the controller installed on your 2010 Ford F-150.

view full answer...

Answer 3

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 4

The suspension of the trucks is different from the vans which is why for your 2008 Ford E-Series passenger van the RAS kit fits are different and you would need the #RAS2612. One side extends forward and the other back to balance the additional…

view full answer...

Answer 5

The correct brake controller harness for your 2023 Ford E-350 to install a Tekonsha Prodigy P3 part #90195 is the part #22292. The connector on your E-350 is in a really unusual location behind the vents above the stereo. To see how to access it…

view full answer...

Answer 6

A Chevy Express cutaway chassis won't have the connector under the dash for installing a brake controller, so the controller will need to be hardwired. You'll first need to install a functioning 4-pole trailer connector on your vehicle, using…

view full answer...

Answer 7

Hey Heber! I the Prodigy P3 Trailer Brake Controller item #90195 will definitely work with your 2024 Ford Eseries cutaway but I am not able to confirm whether or not your vehicle has the port to plug in the custom fit harness that comes with the item…

view full answer...

Answer 8

The wire bundle to install a brake controller on a 2008 Chevy Suburban is tucked up under the dash but may be more to the left of the steering column than on GM trucks. It is most likely tucked up above other components or wiring. There should be a…

view full answer...

Answer 9

I spoke to my contact at Valterra and she said the reason the D&W Inc. Spray-Port RV Exterior Hose Hookup - 2-3/4" Round - Black #PF147006 says it is for non-potable water is to stay in accordance with the Safe Drinking Water Act. The water…

view full answer...

Answer 10

It sounds like you simply need the Camco Quick Hose Connect w/ Flow-Through Connection - Brass #CAM20143. If you don't want to replace the faucet, we also have the separate units with mount #PF147005 in white or #PF147006 in black.

view full answer...

Answer 11

I would be happy to help you find the right connector. It is behind the dash at the very top of your console on your 2019 Ford E-350. You will need to pop that panel out and the connector you are looking for will be plugged into the insert. I have…

view full answer...

Answer 12

Hello Jeremy. We do have the Dexstar Dual Wheel with Offset #AM20783 which is a 16" wheel with a 5.5" offset and the 8 on 6-1/2" bolt pattern just like the 8C2Z-1015-G wheel. The #AM20783 wheel has a 4.75" pilot hole. I did not…

view full answer...

Brake Controller that Fits 2024 Motorhome on E350 Cutaway Chassis

Continue Researching