Recommended Bike Rack for a E-Trike

Question

Question:

I have a Addmotors M360 etrike and the tires are the 4” tire. I have tried to find a cargo hitch carrier to carry it. The tightest measurement of its width and length is 73” x 32” do you have something that would work: Lets Go Aero 74 x 34 GearCage T6 Cargo Carrier - 2 Hitches - Steel. But do you do something in aluminum that would lighten the weight?

asked by: Sharon S

0

Expert Reply:

The Lets Go Aero item # LGA76VR is going to be the largest cargo carrier we have but we do have a bike rack that is designed to carry a e-trike. It is the Hollywood Racks Sport Rider SE Bike Rack for 1 Electric Trike and 1 Electric Bike item # HLY87RR. This carrier has a 90 lbs capacity for a trike and works with wheels up to 5" wide.

expert reply by: Jerred H

0

Answer 1

The Wheelchair Carrier #EM34JV is going to be the largest hitch mounted carrier we have for a trike with a ramp. You would have to have some sort of front wheel tray to support it correctly on this rack. We also have the Lets Go Aero 74" x…

view full answer...

Answer 2

Hi Larry, We do have one option for a bike rack that is capable of carrying an E-Trike, the Hollywood Racks Sport Rider SE Bike Rack for 1 Electric Trike and 1 Electric Bike #HLY87RR. As the name says, the #HLY87RR can carry both an E-trike and a…

view full answer...

Answer 3

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 4

Hi Jon; the actual width of the #IN94MR cargo box is 63-1/2". The full outside dimensions are 63-1/2" long x 28" wide x 15-3/4" tall and the inside dimensions are 57" x 23-1/2" x 14-3/4". The 39" measurement…

view full answer...

Answer 5

I am not aware of any laws regarding altered driving speed limits when a cargo carrier is in use, but it is simple enough to check your local or state laws. Your local highway patrol can likely provide confirmation if there are any such laws in place…

view full answer...

Answer 6

To access the screws needed to remove the vent lid of your MaxxFan to install the new #MA05-30520 you would need to raise the lid so that you can unscrew it from the base of the vent assembly. The screws are not accessible without having the lid up.

view full answer...

Answer 7

For starters, you will need to install a hitch like the Draw-Tite #75726. You will also need a pin and clip, part #PC3 or a locking hitch pin like #e98882 to secure the cargo carrier in the receiver. These are the necessities, but there are other…

view full answer...

Recommended Bike Rack for a E-Trike

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching