Which Westin R5 Running Boards fit 2021 Ram 1500 Crew Cab

Question

Question:

I have the Westin r5. 5” running boards that I took off of. 2021 ram 1500 and I want to put them on a 2024 tundra crew max ? Is there a kit for that. Thanks.

asked by: John J

0

Expert Reply:

Hey John, so the running boards and the mounting kits are made specifically to fit different vehicles so for your 2024 Toyota Tundra crew max you'd need to go with a new kit like the part # W84HX for black or part # W74HX for chrome.

expert reply by: Jameson C

0

John J.

8/12/2024

Thanks Jameson. So basically old running boards are useless unless you buy the same model truck ?? I appreciate you getting back to me.

Jameson C.

8/12/2024

@JohnJ You might be able to sell them used on marketplace or maybe a welder near you could come up with a bracket solution but that might get pretty involved.

Answer 1

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 2

Hey Brooks, we are located near St. Louis, MO in the US and we can ship to Canada. The K-Source tow mirrors part #KS48NQ are a confirmed fit for your 2026 Toyota Tundra TRD as well.

view full answer...

Answer 3

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 4

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 5

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

view full answer...

Answer 6

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 7

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 8

Hey Joe, welcome back! The Furrion Chill Cube Variable Speed part #FR57TQ that you referenced is designed to fit roof thicknesses between 1.5 inch and 2 inch so yours being 2.75 inch is not a problem at all and would not require any additional…

view full answer...

Answer 9

Hey Jon, Most trailer wheel and tire combos - like the Kenda Karrier #KE69JV - do not come pre-balanced. Typically, trailer owners don’t worry about balancing since trailers don’t ride as smoothly as passenger vehicles and you’re not feeling that…

view full answer...

Answer 10

Hey Zigman, the Redarc Tow Pro Liberty part #RED98CR that you referenced is the best option for a brake controller for your 2026 Toyota Tundra SR. This is one of the best performing brake controllers out there and it only puts a small knob on the…

view full answer...

Answer 11

Hey Tommy, you would choose the blue SumoSprings #SS46PV for lighter loads, daily driving, and a softer ride, ideal for occasional towing. While black SumoSprings #SS66PV are better for heavier trucks, frequent towing, and consistent loads, offering…

view full answer...

Which Westin R5 Running Boards fit 2021 Ram 1500 Crew Cab

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching