What is Thread Pitch of Bolts that Come with Thule XADAPT3

Question

Question:

What is the thread pitch on these bolts?

asked by: Josh

0

Expert Reply:

Hey Josh, the bolts of the # THXADAPT3 are M6 x 80mm.

expert reply by: Jameson C

0

Josh

8/9/2024

Yes but what is the thread pitch? Fine? Coarse? 0.75, 1.0, 1.25?

Jameson C.

8/11/2024

@Josh It's fine thread but I don't have info beyond that.

Answer 1

I have a solution for you. I confirmed with my contact at Thule that the older style of Thule Hull-A-Port 835PRO was originally designed to fit Thule square crossbars. However, Thule confirmed that the the Xadapt 3 Xsporter Load Bar Adapter…

view full answer...

Answer 2

Your Thule UpRide Roof Bike Rack - Wheel Mount #TH599000 uses a M6x35mm T-bolt #TH33RV. If your bolt is too short, you could use the longer Replacement 65 mm T-Track Screw for Thule ProRide XT and UpRide Roof-Mounted Bike Racks #TH86VW. This bolt…

view full answer...

Answer 3

Though I would agree that the price for 4 eyebolts is excessive, however that is what they choose to market their product at and there isn't much we can do with that, however check out the: -Eyebolts for Rhino-Rack Aero/Sportz Crossbars #S604.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Daniel; if you have the flush rails on your 2025 Honda CR-V you need the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet #TH52KE. If you don't have any rails, you need the Fit Kit for Thule Evo Clamp and Edge Clamp Roof…

view full answer...

Answer 8

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 9

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

view full answer...

Answer 10

Hey Rick, sorry about the confusion but the etrailer hitch part #e98848 that you referenced fits both the hybrid and non-hybrid versions of the 2025 Honda CR-V including your Sport model. It is organized in our fitguide in a somewhat confusing way…

view full answer...

Answer 11

Hi Rob, both the etrailer hitch part #e98848 and the EcoHitch part #EH25KR will install and function properly on your 2026 CR-V Hybrid Sport Touring, so you’re not risking choosing a hitch that won’t work. Both hitches use a hidden cross tube and…

view full answer...

Answer 12

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

What is Thread Pitch of Bolts that Come with Thule XADAPT3

Product Page this Question was Asked From

Continue Researching