Availability of Trailer Hitch That Fits 1997 Ford Explorer Sport 2-Door

Question

Question:

Can you guys point me in the right direction for a hitch for a 1997 ford explorer sport 2door? Ive looked and cant seem to find one. Thank you.

asked by: Tom S

0

Expert Reply:

Hi Tom; the Curt # C13033 you ordered will fit your 1997 Ford Explorer Sport 2-Door as long as you do not have a full size spare tire. If you do have a full size spare you want the # 13540 instead which won't require relocating it.

expert reply by: Robin H

0

Robin H.

1/19/2026

Hey Tom, how did the fit go with the Curt hitch on your Explorer Sport? It’d be great to know if the spare tire cleared everything as expected. Your update could make it easier for others with the same setup.

Answer 1

Hey Greg, There unfortunately there isn't a guide to tell us the bearing and grease seal combination for your hub so you'll have to remove it and check the bearings/seal for their part numbers or use a digital caliper #PTW80157 to measure the…

view full answer...

Answer 2

Hey Bernie. To remove your Bearing Buddy item #BB1980A-SS, you'll want to get a rubber mallet and a piece of wood and lightly tap the sides of the bearing protector until it's loose enough to pull off with your hand. You'll want to go…

view full answer...

Answer 3

Knowing the inside diameter of the drum is the key piece of information we need; the brand of the assembly will not be a factor in determining what you will need to replace your hydraulic brakes. You mentioned your trailer's GVW, but it is the…

view full answer...

Answer 4

I looked up your Elite custom malibu trailer and found that it's a pretty standard style of boat trailer which we typically recommend spare tire carriers like the #FSTC1000301 which fits 4 on 4 bolt pattern and 5 on 4-1/2 bolt pattern with…

view full answer...

Answer 5

Hey Michael, we have the Dexter trailer axle part #7359765-EB which covers everything you need except it has electric brake assemblies that come with it. To swap to hydraulic brake assemblies you'd need to replace what the axle comes with with…

view full answer...

Answer 6

Even though we don't have any bike racks to carry your trike, I do have a solution for you. You can add a hitch and a small utility trailer. First the hitch, you could use the Curt #13540 or Curt #C13106 hitch. Both allow you to keep your full…

view full answer...

Answer 7

The closest thing that we have to your description if the Titan Brake Actuator with Manual Lockout #T63FR. This is rated for 7,500 lbs towing/750 lbs tongue weight, is compatible with a 2" hitch ball, comes with a manual reverse lockout, and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...