Pintle Hooks that Can be Used with Stowmaster Tow Bar with Lunette Ring

Question

Question:

Will this pintle hitch work with your Stowmaster towbar with a 3 inch lunette ring?

asked by: Craig W

0

Expert Reply:

Hey Craig, so the Curt pintle part # C48005 that you referenced is designed for lunette rings that are 2-1/2 inch in diameter like the part # RM-581 and not the 3 inch ring part # RM-583.

For a similar pintle hook that fits both sizes we have the part # 337RM5P.

expert reply by: Jameson C

0

Jameson C.

1/19/2026

Hey Craig, did the Buyers pintle hook end up fitting your Stowmaster tow bar with the 3-inch lunette ring? Knowing how it worked could help others trying to match the same setup.

Answer 1

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

view full answer...

Answer 2

We have a couple options for you. I recommend the Curt Pintle Hook for 2" Hitches - 10,000 lbs #C48005 or #TR63043 either of which will fit in a 2 inch receiver as you stated. This is rated for well over what a UTV can handle. We also have the…

view full answer...

Answer 3

The only difference between the two pintle hooks you referenced is the weight capacity. - Curt Pintle Hook for 2" Hitches #C48005: 10,000 lbs - Curt Pintle Hook for 2" Hitches #C48004: 20,000 lbs Apart from that, both pintle hooks are made…

view full answer...

Answer 4

The distance you are looking for is 5-7/8 inches on the Curt Pintle Hook #C48005 that you referenced.

view full answer...

Answer 5

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Answer 6

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

view full answer...

Answer 7

Hi Alfredo! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C22RJ will indeed fit your 2026 Hyundai Palisade Hybrid. We haven't had the chance to install one of these quite yet, but I checked with Curt and they actually said…

view full answer...

Answer 8

For your Dico Model 10 actuator the Titan replacement Inner Slide Assembly #T2478300183 is going to be exactly what you will need. It is recommended that you install new slide bearings as well so for that you would need part #T1020900. I attached a…

view full answer...

Answer 9

The 2016 Chevrolet Colorado does not have a plug-in adapter for a brake controller such as the Tekonsha Prodigy P3 Trailer Brake Controller part #90195. However, the wires that will need to be hardwired into the adapter are already present on the…

view full answer...

Answer 10

The outer tube of the Bulldog #BD0289800300 Gooseneck Trailer Coupler measures 20 inches long as shown in the diagram that Bulldog provided for me. The outer tube is 4-1/2 inches square. The inner tube is 4 inches square and measures 31 inches long.…

view full answer...

Answer 11

I have attached for you below the install instructions for the Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators part #DM5939. If following these steps does not fix your issue please let me know which exact actuator you're…

view full answer...

Answer 12

The Tekonsha OEM Replacement Vehicle Wiring Harness part #TK22115 is a great option for a 2017 Mercedes-Benz Sprinter 2500. It as you noted has a 7-way plug but there isn't a complete harness with both 4 and 7-way plugs as is. Therefore, I…

view full answer...

Pintle Hooks that Can be Used with Stowmaster Tow Bar with Lunette Ring

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching