Arrives before Christmas 
This 14-3/4" long pintle hook slides into your 2" x 2" trailer hitch receiver so you can quickly and easily equip your vehicle for pintle-style towing. Haul up to 10,000 lbs. Durable forged steel is powder coated to resist rust.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the five ton receiver mount pintle hook. This five ton pintle hook will feature a single piece, drop forge lower draw, and a nice black powder coat finish over the whole part, for maximum durability and resistance to corrosion.The pintle hook is compatible with a large range of towing accessories, and it is ideal for loads up to ten thousand pounds. It's very quick to install and remove, with this integral shank that will fit into a two inch by two inch receiver tube. It does use a 5/8 inch standard hitch pin hole here. Now, the 5/8 inch pin and clip is sold separately on our website.This is a forged steel construction. The draw bar inner diameter, which is right in here, is two inches by inches.
It has a maximum gross trailer weight capacity of ten thousand pounds, and a maximum vertical loader ton weight capacity of two thousand pounds.Just to show you how you hook up, basically they have this snapper pin, which is a safety pin, just unclip it, slide it out, and you have a little grip here with some rubber protectors on it. All you have to do is lift up on that, and then pull your pintle hook all the way back, just like that, hook your lunette ring to it, and then just lift up, and it will lock closed, and then this lock locks in place. For extra safety, you just slide this through the holes, then clip it into place, and then that will lock it from opening up.But that should do it, for the review on the five ton receiver mount pintle hook.
Average Customer Rating: 4.8 out of 5 stars (116 Customer Reviews)
This 14-3/4" long pintle hook slides into your 2" x 2" trailer hitch receiver so you can quickly and easily equip your vehicle for pintle-style towing. Haul up to 10,000 lbs. Durable forged steel is powder coated to resist rust.I went out of my way to buy this one specifically because it was the only one I could find listed as American made.
Well it showed up made in China.
The quality is decent and it will do the job but it hurts to know I can’t buy a American made pintle hook at all.
If I had known I would have put in time to shop used locally.
Perfect for tow straps and recoverys for fellow offroaders or jus yanking someone out of the mud.
Works perfect
Did what I needed.
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
I drilled another 21/32" hole in my hitch, which brought it nearly 2" closer to the truck. I debated welding the original hole shut but decided not to due to the unknown heat factor. It hasn't folded up yet, and I'm sure there's been a few times when I was grossly overloaded, and significantly beyond tongue weight at least until things were situated properly. Never had a problem. Wish it would've been closer to the truck from the get go but if another hole would've weakened anything, I'd have bent it already.
Very well made with substantial weight capacity. Good finish. Bolt pattern fit my pintle hitch perfectly. I’ve ordered many times now from etrailer and the shipping is always fast.
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
The product I needed at a great price. This will make moving equipment much easier.
Easy came fast and exactly what I neede d.
Just what I ordered. Will work well
2 1/2" receiver Pintle hitch works great. Very heavy duty. I pull 30 foot trailer with a 16,000 pound backhoe on it and it works great.
Very good product
This Curt Pintle Hook, along with the Buyers Products 3 position hook mount, works just fine. Good heavy duty hitch!
I really like how the hook mount is one solid piece. I ordered the pintle hitch recommended to go with this mount, the only downside is the bolts are larger than the mounts' predrilled holes. Not a big issue for me as I have the tools and bits to enlarge the holes but for someone who doesnt they would have to take it to someone to be done. Other than that great products!
Works excellant as a mount for my pintle. I bought it to run upside down to level my trailer.
The hole drilled for the pin should be further ahead so more of the I beam part of the hitch is able to slide into the receiver. This would make it a lot stronger and would allow for the pintle eye to be closer to the truck which in turn would make the trailer handle better and would be less stress on the product with more support overall.
Solid, well-built, and provides a great fit for 2 1/2” hitch. Definitely provides peace of mind with the loads I’m pulling knowing the capability of this hitch. Highly recommended!
Works really well. Bolted to the pintle hitch perfectly and the finish has stayed on.
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.