Trying to Mount Pioneer Platform to Roof of Utility Trailer

Question

Question:

Hi. I have a 6x12 enclosed trailer that I would like to install on the roof RackEm Fitz-All Enclosed Trailer Ladder Rack so that I can mount my Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 106 Long x 58 Wide Part Number: RR49AP onto it. The only item I have found on the site to make this possible is Rhino-Rack RX100 Legs for Vortex Crossbars and Pioneer Platforms - Raised Factory Side Rails. Please let me know if there is a better option. Thank you.

asked by: Christian

0

Expert Reply:

Hey Christia, the load bars of the Rack'Em ladder rack # RA-28 are much taller than any of the hardware that the Pioneer Platform trays are designed to fit so we don't have anything that would work for what you are wanting. (scroll down to see solution)

expert reply by: Jameson C

0

Christian

8/8/2024

Hi. Understood… if not that ladder rack, what other suggestions would you have to offer for how I might mount my Pioneer rack to a cargo trailer roof?

Jameson C.

8/8/2024

@Christian One solution would be the Rhino Rack Heavy Duty Roof Rack for Camper Shells part # Y01-130B mounted to your trailer's roof and then using the HD crossbar adapter for Pioneer Platforms # RR43105 to attach the part # RR49AP to the bars.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Trying to Mount Pioneer Platform to Roof of Utility Trailer

Product Page this Question was Asked From

Continue Researching