Flat Towing Components Needed For A 2024 Ford Bronco Badlands With HD Modular Bumper

Updated 08/03/2024 | Published 08/01/2024

Products Featured in This Question

Blue Ox Base Plate Kit - Removable Arms

(4620)

$609.00

Blue Ox Base Plate Kit - Removable Arms

(4620)

$608.95

Hook Probe Circuit Tester

(61)

$13.33

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3192)

$180.80

Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights - 7-to-6-Way Adapter Cord

(145)

$325.09

Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord

(288)

$255.28

Roadmaster Stop Light Switch Kit

(625)

$54.69

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

(497)

$1329.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(759)

$1175.00

Question:

I’m purchasing a 2024 Ford Bronco Badlands with the HD Modular bumper. I want to two this with my RV. I have the Blue Ox Avail towbar already. I need the tow baseplate and wiring kit. I believe the correct baseplate is BX2692. Can you tel me the correct wiring kit to purchase? Thanks Steve

asked by: Steven T

Expert Reply:

Hey Steve,

The Blue Ox Base Plate Kit # BLU23XR (BX2692) would be the correct fit for your 2024 Ford Bronco with the HD Modular Bumper. For the light kit you'll need the check if you have variable voltage tail lights. To determine if you have variable voltage tail lights you'll need to pull the tail light out to get to the wiring and test wires with a probe tester # PTW2993 in order to see if the same wire powers both the running lights and brakes.

If you have variable voltage LED tail lights then you'll want the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit # RM38FR. For variable voltage incandescent bulbs you'll need part # RM26FR. If you don't have variable voltage tail lights then you can use standard diodes with part # RM-15267.

If you haven't picked out your braking system then I recommend the Demco Stay-IN-Play Duo # SM99251 if your motorhome has hydraulic brakes. This is system has an indicator light that will need to tap into the brake light switch in your Bronco. Since this wire isn't useable you'll need to install the Roadmaster Stop Light Switch Kit # RM68MR for the signal.

If your motorhome has air brakes then you'll want the Demco Air Force One # SM99243, which won't require a stop light switch kit for its indicator light.