Timken Bearing Kit for Forest River Cherokee 274DBH

Question

Question:

Can you tell me what Timken wheel bearing parts I need for my Forest river cherokee travel trailer model 274DBH ?

asked by: Craig G

0

Expert Reply:

Hey Craig, for a Timken bearing kit for the 3,500 lb axle you have on your Forest River Cherokee 274DBH you'd need the part # TMK52VR which comes with bearings, races, and a seal.

expert reply by: Jameson C

0

Jameson C.

2/3/2026

Hey Craig, how did the Timken bearing kit work out for your Forest River Cherokee trailer? Your update could make it easier for the next person looking for the right bearings for their axle.

Answer 1

Hey Ryan! I sent that information to Lippert and despite the weight rating of 2,200 lbs it has a 3,500 lb axle spindle. I thought that was the case since LCI35 indicates 3,500 lbs but usually the axle rating isn't that much lower. Based on this…

view full answer...

Answer 2

Hey Tim, thanks for the information. Since your Jayco Jay Flight has 3,500 lbs axles you'll need the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle item #TMK52VR. This kit includes a 010-019-00 seal, along…

view full answer...

Answer 3

Hey Scott, thanks for reaching out! The Timken Bearing Kit #TMK92VR you're looking at is for a 7K axle, and according to my research your 2021 Jayco Jay Flight SLX 195RB should be equipped with a 3.5K axle so we need to get you a different kit.…

view full answer...

Answer 4

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 5

Hey Shane, so the Timken bearing kits are made in the USA so what would be perfect for you would be the part #TMK52VR is a USA made 3,500 lb axle trailer bearing kit. Have you had bearing problems in past?

view full answer...

Answer 6

Hey Mark, since we know your 2022 Imagine 2400BH trailer has 3,500 lb axles the correct bearing kit would be the part #TMK52VR. Bearing replacements are all based on the axle capacity of the trailer. Are you looking to have a spare set on hand or do…

view full answer...

Answer 7

Hey Joseph! That is a 3,500 lb Lippert axle so you can use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100. If you prefer a Timken kit made in the USA the #TMK52VR is also available. Both come with…

view full answer...

Answer 8

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

view full answer...

Answer 9

Hi Jayme, Thanks for that info and there is a bearing kit with the L44649 and L68149 bearings you need; the correct kit is the following: - Hub Bearing Kit #BK2-100 This comes with both of those bearings as well as their accompanying races, the…

view full answer...

Answer 10

Hi Tony; the #BK2-100 and #TMK52VR come with the same size bearings and grease seal. The main difference is the Timken name. This is usually associated with a higher quality bearings that are made in the USA which also accounts for the higher cost.

view full answer...

Answer 11

Hey Jason, thanks for reaching out! Your 2022 Grand Design Transcend Xplor 265BH either has 3,500 lb axles or 4,400 lb axles. Both are listed out on the Grand Design website so you'll just need to check out the tags in the middle of your axles to…

view full answer...

Answer 12

You can install friction sway control on both sides of a trailer like the part #17200. The only recommendation I would make is to be aware that when backing the trailer in tight situations you should probably remove the sway controls. This would be…

view full answer...

Timken Bearing Kit for Forest River Cherokee 274DBH

Product Page this Question was Asked From

Continue Researching