Why Does My Lippert Quick Level Jack System Not Extend

Updated 07/16/2024 | Published 07/07/2024

Question:

Have Lippert system that rear door side jack will not extend. Why is this happening?

asked by: Cody M

Expert Reply:

Cody, there can be a bunch of reasons why your Lippert Quick Level jacks are not extending, but some of the most common reasons is usually due to a dead battery, overextending your jacks, or a blown fuse.

I'd recommend checking the easy stuff first, so the fuse in this case. If the fuse is blown just replace it and check again. If the fuse is fine, you can move onto the battery.

For the battery, you're going to need to check to make sure that it's reading normal voltage. If it's not, then let the battery charge for a day or so, and then check your jacks again.

The last thing you can check is the wiring. This part isn't the most fun, but you'd need to go through all of your wiring and look for any broken, pinched, or loose wires. If there are any, replace the wire(s) in place and check again.

expert reply by: Bryce D