What Electrical Connection Works With Hidden Hitch By Draw-Tite On a 2018 Audi Q5?

Question

Question:

Is there an electrical connection for Item DT29GR. To be utilized with trailers that have brake/license plate lights? Thank you.

asked by: Juan

0

Expert Reply:

You would need to use the 4-Way # 119250KIT with the Hidden Hitch by Draw-Tite # DT29GR for your 2018 Audi Q5 connecting to a small trailer with just brake and running lights. They do not offer a kit like you get with the Stealth Hitches # 391AUDQ518T which connects into the receiver so the connector will need to be secured another way.

expert reply by: Bud M

0

Answer 1

I reached out to my contact at Kuat, and sent him the picture you attached, and he said that what you are seeing is actually pretty common when using the Shank Adapter #D101. He said the hitch pin holes will indeed be a bit off center when using the…

view full answer...

Answer 2

Your 2017 Dodge Journey is one of the vehicles for which two types of hitch are made, both a smaller 1-1/4-inch Class II hitch and a 2-inch Class III. In such cases we always recommend the 2-inch option since it will be compatible with more…

view full answer...

Answer 3

Yes, all of the hitches we carry for your 2020 Audi Q7 require fascia trimming. The Curt, part #C13277 has the least amount of trimming. I've attached pictures that show how much trimming is needed for each hitch. Despite the Curt requiring less…

view full answer...

Answer 4

With the Stealth hitch that fits your 2017 Audi Q7 part #391AUDQ716 the hands free lift gate sensors would not be affected at all. The trimming of the fascia is not near enough to the sensors to be an issue at all. Since this hitch has a lower…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

view full answer...

What Electrical Connection Works With Hidden Hitch By Draw-Tite On a 2018 Audi Q5?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching