Will Pro Series Jack # PS1401460303 Fit etrailer Pipe Mount # e52JR

Question

Question:

Will this jack fit onto part - etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8inch Swivel Pin Item e52JR That bracket bolts onto my frame instead of finding a welder and I am looking for a swivel jack that can mount to it.

asked by: David S

0

Expert Reply:

Hey David, yes the Pro Series jack part # PS1401460303 will work with the pipe mount part # e52JR as they are both 2 inch.

expert reply by: Jameson C

0

Answer 1

Hey Tim, From the center of the pin hole back to the mounting plate on the etrailer Bolt-On Swivel Mounting Plate #e52JR is approximately 1-3/4". The plate is 1/4" thick and portion that would sit under the frame extends out 1-3/4". If…

view full answer...

Answer 2

Hey there Gary, thanks for the photo and yes the etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin #e52JR will indeed work with your Round, Pipe Mount Swivel Jack #TJP-5001S-B.

view full answer...

Answer 3

Hello Everett, thanks for reaching out. Sadly, we do not offer the replacement locking handles for the B&W Companion 5th Wheel Hitches. If you reach out directly to B&W they should be able to provide the parts you need. They will likely ask…

view full answer...

Answer 4

The diameter of the hole on the Round Snap Ring Swivel Jack #TJB-2001-Z you referenced comes with mounting bracket #TJB-MB which has a 2-1/2 inch outer diameter and 2-1/4 inch inner diameter. If your current mounting bracket has a hole of that…

view full answer...

Answer 5

We do have the replacement part you need. I reached out to Kaufman to get the specific dimension of your wheel stud for your 2016 3 car wedge with 7,000 lb axle. They told me that it is a 1/2 inch x 1.99 with 20 threads per inch. The replacement part…

view full answer...

Answer 6

For your companion hitch the replacement pivot arms are now only available with the base which for your model 3000 is #BWRVB3500. I'm not sure what u-bolts you are referring to, so I assume it is the chains and that is part #BW1900-2-1600. If you…

view full answer...

Answer 7

Hi Corey; the answer to your question depends on what you have now. Are you replacing another Advent Air unit or Dometic unit with a 6-pin plug? If so, this will plug directly into your existing setup and work with your air distribution box (ADB) and…

view full answer...

Answer 8

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...