How Tall Above Roof Does Maxx Mini Deluxe 3857 # MA00-03801 Sit

Question

Question:

Maxx Mini Deluxe 3857 Item MA00-03801 how far above the roof does the fan extend?

asked by: Cindy S

0

Expert Reply:

Hey Cindy, when the Maxx Mini Deluxe 3857 # MA00-03801 is installed it will sit 4-1/8 inches above the roof.

expert reply by: Jameson C

0

Jameson C.

2/17/2026

Hey Cindy, did the 4-1/8 inch height of the Maxx Mini Deluxe work well with your roof setup? Knowing how it fit could help others planning for clearance on their vents.

Answer 1

Great question! The All Terrain Landing Gear for RV Scissor Steps, #TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps #AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill…

view full answer...

Answer 2

Those loops you see on the side of the brackets on the #TLA8000 are for the TorkLift GlowGuide Handrail #TLA7621. I attached a picture that shows how the handle attaches to those loops.

view full answer...

Answer 3

For your mounting height of 43 inches the best solution we have is the part #AS25 which has a mounting bracket height of between 40" - 48" which would be perfect for you. The additional step you mentioned would not interfere with that…

view full answer...

Answer 4

Which holes are you talking about specifically on the steps?

view full answer...

Answer 5

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 6

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

How Tall Above Roof Does Maxx Mini Deluxe 3857 # MA00-03801 Sit

Product Page this Question was Asked From

Continue Researching