Hellwig Above Axle Helper Springs For A 1996 Toyota Tacoma

Question

Question:

I have a 1996 Toyota Tacoma, its a basic standard cab, 5 speed. I want to be able to cheaply add a little weight capacity to it, I like to collect rocks, and our newer 4Runner will haul twice what this truck will. Will the 550 or the 900 over the top support help me to keep the leaf springs from sagging with a load? the leafs are only a year old, I boutght the truck with a broken leaf, now I know why.

asked by: Dave

0

Expert Reply:

Hello Dave. The Hellwig Above Axle Helper Springs will definitely help add support and stop the vehicle from sagging. The Hellwig EZ-550 Helper Springs - Above Axle # HE72FR is what I recommend for your 1996 Toyota Tacoma. While these will help with the sagging, keep in mind that they will not increase the weight carrying capacity of your vehicle.

expert reply by: Jesse M

0

Jesse M.

2/17/2026

Hey Dave, how did the Hellwig EZ-550 helper springs work out on your Tacoma? Did they give you the extra support you needed when hauling your rock loads? Your update could make it easier for others looking to reduce sag on similar trucks.

Answer 1

The Hellwig EZ-550 #HE72FR installs above the leaf spring behind the axle on your 2023 Toyota Tacoma. See the picture below.

view full answer...

Answer 2

Yes, it does. The Hellwig EZ-550 Helper Springs item #HE72FR installs directly above your 2018 Toyota Tacoma's leaf springs. You will not need to modify anything.

view full answer...

Answer 3

Since the 1996 Toyota Tacoma has separate turn and brake signals, a converter is necessary. Fortunately, there is a plug-and-play harness, part #118379, available for your Tacoma that makes installing very easy. It simply plugs in-line with the tail…

view full answer...

Answer 4

The height of the SumoSpring Solo Custom Helper Springs #SSR-612-47 is 4-1/2". Since you have a lift on your 2023 Toyota Tacoma you will need to measure to see if they will fit or not. There should be 1/2" - 1" gap once installed for…

view full answer...

Answer 5

Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…

view full answer...

Answer 6

Hey, Brent. Thanks for sharing the GVWR and hitch weight. Based on that information, yes, the Weigh Safe True Tow Weight Distribution Hitch part #WS49MR will work for your setup. One thing to keep in mind is that the 1,400 lb hitch weight rating does…

view full answer...

Answer 7

I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks #Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the…

view full answer...

Answer 8

G, Yes both the Hellwig EZ-990 Helper Springs #HE67FR and the SumoSprings Solo Custom Helper Springs #SSR-117-47 can be used together. The SumoSprings will replace the factory bump stops, and the Hellwig bolts above the factory leaf springs so the…

view full answer...

Answer 9

Hi Paul! Since you said occasional towing, I am going to steer you away from the Timbren option. They can be pretty rough and you will definitely feel it when you are not towing. If you had a constant load, it would have been an option, but I…

view full answer...

Answer 10

No, you can not and the Hellwig EZ-550 Helper Springs item #HE72FR mount on top of the leaf springs. However, they do not fit a 2012 Nissan Xtrerra. The only option we have for a leaf spring system for your Nissan are the RoadActive Suspension Custom…

view full answer...

Hellwig Above Axle Helper Springs For A 1996 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching