Roof Bag for Yakima SkinnyWarrior Roof Rack Cargo Basket

Question

Question:

Would this be the best fit for a Yakima Skinnywarrior cargo basket? If not, is there a better option?

asked by: Good F

0

Expert Reply:

Yes, the Rhino-Rack Rooftop Cargo Bag # RRLB200 is the best fit for the Yakima SkinnyWarrior # Y07014.

expert reply by: Robin H

0

Robin H.

2/17/2026

Hey, how did the Rhino-Rack rooftop cargo bag work out with your Yakima SkinnyWarrior basket? Your update could make it easier for the next person looking for the right fit.

Answer 1

The Rhino-Rack Rooftop Cargo Bag #RRLB200 is made of a poly canvas tarpaulin which is going to be a flexible material, not a hard rigid surface. The confusion is likely because the Rhino-Rack Rooftop Cargo Bag #RRLB200 is designed to be used on a…

view full answer...

Answer 2

For the Yakima SkinnyWarrior #Y07014, I recommend the cargo net #Y07018. This is a stretchable 55" long 21" wide cargo net and is made specifically to go with the SkinnyWarrior cargo basket that you were looking at.

view full answer...

Answer 3

Hey Blake, yeah it is a little difficult to let you know the exact best type of hardware to use to mount your lights in your Yakima HD crossbars but we do know that the Yakima T-Bolts part #Y8880184 are correct for the top channel of your crossbars…

view full answer...

Answer 4

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 5

I recommend picking up the Aero Style Crossbar T-Slot Fit Kit #MPG8287 which comes with bolts, nuts, and washers that will fit in the Yakima HD Bar T-Slots like the 78" part #Y01159. If you're trying to find specific dimensions for your own…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Roof Bag for Yakima SkinnyWarrior Roof Rack Cargo Basket

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching