Which Replacement etrailer Brake Assemblies Fit Lippert 2500lb Axle NV204681?

Question

Question:

I have a 2011 Heartland Edge21. The axel is a lippert Component NV204681 GAWR is 2500 lbs. Are the e-trailer drum brakes product AKEBRK-35 right fit for this axel? Thanks

asked by: Michael T

0

Expert Reply:

Hey Michael,

I reached out to Lippert with your NV204681 number and can confirm for your axle the etrailer Brake Assemblies # AKEBRK-35 will fit your axle perfectly.

If you're needing hubs as well (Check the surface inside the hub that touches the magnets for damage, if there's scratches you can feel with your fingernail you really need to replace the hubs as well) then you'll need the # AKHD-545-35-EZ-K as well.

expert reply by: Samuel C

0

Michael T.

6/6/2024

Does the hub come in a pair or are they singles?

Samuel C.

6/6/2024

@MichaelT # AKHD-545-35-EZ-K is a single hub, you'll need (2) per axle.

Answer 1

In order to add electric brakes to a trailer you'll need to know the axle capacity and wheel bolt pattern. The axle capacity should be printed on a tag in the center of the beam. Once you have this you can use it to pick out the correct braking…

view full answer...

Answer 2

If you need to find the size of the correct replacement braking assembly for your boat trailer you will need to remove the trailer hub and measure the inside contact patch with the shoes which you can see in the attached photo. You will also want to…

view full answer...

Answer 3

The Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs #AKEBRK-35 has a mounting pattern that is typical for 3,500 lb axles. The center on center horizontal measurement of the mounting bolts are 2-7/8 inches and…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 11

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Which Replacement etrailer Brake Assemblies Fit Lippert 2500lb Axle NV204681?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching