Replacement Idler Hub Assembly With LM67048 Inner and LM11949 Outer Bearings
Updated 06/11/2024 | Published 06/03/2024
Question:
I need a replacement hub assembly for an old trailer. It’s stamped with 10 35214-R, has LM67048 inner bearings and LM11949 outer bearings. The hub is 3.5” tall and a the bolt pattern is 5 on 4-3/4”. Do you have a replacement for this hub? Thank you.
asked by: Aaron S
Expert Reply:
The Dexter Trailer Idler Hub Assembly # DX22XR you found is our only idler hub which uses the LM67048 inner and LM11949 outer bearings and has a 5 bolt pattern. Unfortunately this is the 5 on 4-1/2" bolt pattern and not the 5 on 4-3/4" you already have. So you would need to change your wheels to the more common 5 on 4-1/2" pattern.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- LM67048 / LM11949
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Q&A: Could Dexter 2,500 lb Axle Hub DX22XR Fit on 6 inch Long Spindle
- Search Results: trailer tires and wheels
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat
- Search Results: trailer skid wheels
- Q&A: Replacement Hub Needed with LM67048 Inner Bearing and LM11949 Outer Bearing
- Shop: Fulton Grease Cap - 1.786" Outer Diameter - 1-9/16" Tall - Drive In
- Q&A: Replacement Jack Leg And Motor For A 4100 Series HappiJac Electric Truck Camper Jack System
- Shop: Towing Mirrors
- Search Results: trailer hubs and drums
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seals 10-36 (pair)
- Shop: Dexter Grease Cap - 1.785" Outer Diameter - 0.89" Tall - Drive In
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Search Results: reese 94920
- Q&A: How to Determine the Pin Weight of a 5th Wheel Trailer
- Video: In-Depth Review of the etrailer Bearing Protectors w/ Covers for 1.78" Hub Bore
- Q&A: Troubleshooting No Power to 7-Way Connector on 2014 Honda Pilot
- Q&A: Installing a Brake Controller in a 2007 Hummer H3
- Shop: Trailer Wiring
- Q&A: Kelsey Brake Controller Not Working with Manual Override on a 1997 Ford F-350
- Video: Feature Breakdown: Grease Seals (pair)