Could Dexter 2,500 lb Axle Hub DX22XR Fit on 6 inch Long Spindle
Updated 02/17/2026 | Published 06/11/2024
Question:
could you tell me what spindle length or spindle does hub dx22xr fits. i need a hub with those bearings that will fit a 6in spindle. thank you.
asked by: Tom B
0
Expert Reply:
Hey Tom, so the length from front to back on the Dexter 2,500 lb hub part # DX22XR is 4 inches but if you have the correct bearings for this hub I'd assume you measured your spindle overall and that's why it's showing 6 inches. Can you verify that you have a 2,500 lb capacity axle? If so, then this would be the correct replacement for it.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- LM67048 / LM11949
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: axle stub
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Search Results: #84 spindle
- Shop: Benton MoveHitch 60x24 Cargo Carrier for 2" Hitches w/ Cargo Net - Aluminum - Folding - 500 lbs
- Q&A: Is 1.25" ID Bearing Too Large to Replace 1.19" ID Bearing?
- Shop: Grease Seal
- Video: All You Need to Know About the Grease Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Search Results: wheel bearings
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Search Results: license plate trailer lights
- Search Results: trailer safety chains
- Search Results: identification light bar
- Q&A: Can I use a different seal than what comes with DX22XR
- Search Results: light bar
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Article: Trailer Lighting Requirements
- Q&A: Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes
- Video: Checking Out the Optronics LED Clearance or Side Marker Light w/ Reflector
- Q&A: Replacement Hub for Titan 17214
- Q&A: Looking for Safety Chains that Fit 2020 1995 Lance Trailer
- Video: Comprehensive Review: LED Clearance or Side Marker Light with Reflector
- Video: LED Identification Light Bar for Trailers over 80" Wide Review
- Video: BulletProof Hitches 5/16" Safety Chains with Clevis Hooks Feature Review
- Video: Complete Breakdown of the Identification Light Bar for Trailers over 80" Wide
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Shop: Mud Flaps
Jameson C.
2/17/2026
Hey Tom, did you get a chance to confirm that your axle is rated for 2,500 lbs to match the Dexter hub? Knowing how that check turned out could help others trying to match their spindle length.