Anti-Sway Bars For A 2019 Newmar Ventana LE 4037 On A Freightliner XC-Series Chassis

Question

Question:

Looking for anti-sway bar for 2019 Newmar Ventana LE 4037 Please contact me when convenient Thanks

asked by: Al B

0

Expert Reply:

Hello Al, thanks for reaching out. According to the online user guide, your 2019 Newmar Ventana LE 4037 is on a Freightliner SC-series chassis. We do offer both a front and rear sway bar for this vehicle. Here is what I recommend:

- Roadmaster Front Anti-Sway Bar - 2" Diameter # RM-1209-139

- Roadmaster Rear Anti-Sway Bar - 2-1/8" Diameter # RM-1209-140

expert reply by: Jesse M

0

Answer 1

A Gas Shock #372-5300-20 is attached to your door and frame with Mounting Brackets #372BR-1015. To position the mounting brackets correctly you will need to consider the shock dimensions along with the size of the door. This shock is 11.41"…

view full answer...

Answer 2

I checked with Roadmaster and confirmed the Roadmaster Rear Anti-Sway Bar part #RM-1209-140 as a fit for a 2022 Tiffin Allegro Red 340 on Freightliner XC-Series Chassis. It doesn't look like we have any install videos at this time (they will be…

view full answer...

Answer 3

When you say you have 2 batteries, I am assuming you may have a diesel model. Even if this is the case, you still only need one battery disconnect kit. This is because batteries are wired together on a single system. If you use the disconnect on one…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Anti-Sway Bars For A 2019 Newmar Ventana LE 4037 On A Freightliner XC-Series Chassis

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching