Looking For Hardware For Ford OEM Gooseneck Puck System

Question

Question:

Looking for the hardware required to install a Ford OEM gooseneck puck system on a 2018 f250. We bought a used system but have been unable to source the needed nuts and bolts from a dealer like we were told.

asked by: Aaron G

0

Expert Reply:

Hello Aaron, thanks for reaching out. I am sorry to say that we do not offer a hardware kit for a Ford OEM gooseneck puck system. This would only be something that Ford could provide, and to my knowledge, the OEM puck systems are tough to get aftermarket. Perhaps they could provide you with specs for the hardware so that you could purchase something locally?

Aside from that, the only solution we can offer would be to use an aftermarket gooseneck hitch in your truck. The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1116 is what I recommend for the 2015 F250.

expert reply by: Jesse M

0

Answer 1

We have exactly what you need, Don! The Reese underbed puck system is exactly what Ford would have put in you 2025 F-350 from the factory. There is an additional part needed depending on if you have the factory welded inner frame brackets or not. I…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…

view full answer...

Answer 5

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Answer 6

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

view full answer...

Answer 7

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 8

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 9

Hi Ryan! I see you ordered the DeeMaxx set already, but I still wanted to get you an answer to your question. The only real difference between the Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Galvanized #8-231-50UC1…

view full answer...

Answer 10

Hello Dan, Welcome to etrailer. I am really glad you found us! First off, congrats on the North Point!! You are absolutely right to question the salesperson’s recommendation. Unfortunately, some dealers focus more on moving units than on making sure…

view full answer...

Answer 11

Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…

view full answer...

Answer 12

Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…

view full answer...

Looking For Hardware For Ford OEM Gooseneck Puck System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching