Is a Flashing Green Light Normal on the Tuson Asymmetric Sway Control
Updated 05/31/2024 | Published 05/23/2024
Question:
Hi, I have a 2015 Ford F-150. I have hooked up the Tuson sway control system that I just purchased last week from etrailer. I have everything hooked up the light is green and flickering, my question is the truck no longer says trailer connected, so it thinks it’s not connected. I haven’t pulled the trailer yet to see if it will change. Just want to make sure it’s working correctly. Thank you
asked by: CHRIS B
Expert Reply:
Hey Chris, I checked out the instruction manual for the Tuson Asymmetric Sway Control # 335TSC-1000 and it looks like a flickering green light is a good thing and that's supposed to happen. Your truck probably hasn't registered the sway control device yet because you haven't finished setting it up.
I'd recommend finishing the setup as outlined in the instructions and see if the flashing goes away.
(click to enlarge)
Product Page this Question was Asked From
Tuson Trailer Sway Control System - Electronic - Up to 4 Axles
- Weight Distribution Hitch
- Sway Control Only
- Tuson RV Brakes
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Search Results: redarc tow~pro elite
- Shop: Curt Spectrum Brake Controller w/ Custom Harness - Dash Mounted Knob - Up to 4 Axles - Proportional
- Video: Trailer Brake Controller Installation - 2004 Ford F-250
- Video: Redarc Tow-Pro Trailer Brake Controller Control Knob Universal Mounting Panel Review
- Shop: Redarc Tow-Pro Elite Brake Controller w/ Custom Harness - Dash Knob - Off-Road Mode - Up to 3 Axles
- Shop: Redarc Tow-Pro Elite Brake Controller w/ Custom Harness - Dash Knob - Off-Road Mode - Up to 3 Axles
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Vehicle Lights
- Q&A: Comparing the Curt Spectrum Brake Controller to Redarc Tow-Pro Elite
- Shop: Tuson Trailer Sway Control System - Electronic - Up to 4 Axles
- Shop: Curt True Course Advanced Bluetooth Trailer Sway Control - 1 to 4 Axles
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Video: Installation: Curt Spectrum Brake Controller w/ Custom Harness on a 2020 Chevrolet Colorado
- Video: Curt Brake Controller C51322 Review
- Q&A: Comparing Tuson and Curt Electronic Sway Control Devices
- Q&A: Options to Vent a Storage Compartment on an RV
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Recommended Trailer Sway Control For a Forest River R-Pod Pulled by a 2015 Honda Pilot
- Q&A: Sway Control Options For A Boat Trailer Being Towed Behind A 5th Wheel
- Q&A: Replacement Motor for Klauber Slide Out Motor K01431B300
- Q&A: Comparing the Tuson and Lippert Electric Trailer Sway Control Systems
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: Brake Controller Installation: Starting from Scratch
Chris B.
5/29/2024
Hi Bryce, thanks for getting back to me. I did finish the installation and the truck still won’t recognize the trailer hooked up. So I called tech support at Tuson and we tried some different things, but nothing work. So the problem is the blue wire from the truck is not going through the Tuson sway controller for some reason, he was not sure if it’s the truck or the controller, so we are trying one more thing to see if it will work. He suggested to buy two brake magnets and hook them up before the box to see if that will send the signal all the way through to the brakes. I will be installing those and testing them out tomorrow. If that doesn’t do it, they said the will warrant out my controller and send me out another one. I will post again with my results.