Troubleshooting Grand Design Reflection 6K Leaf Spring Bent From Equalizer
Updated 05/21/2024 | Published 05/18/2024
Question:
I replaced the factory 4 leaf springs on my Grand Design Reflection with e94sr springs. The center equalizer seems to be binding up and it bent the rear of the front spring. Do you have a measurement for the distance between the hangers? I feel like they are too close. Mine is 30 1/2 inches from center to center. Can send a picture if that would help. Thanks
asked by: Jim K
Expert Reply:
Hey Jim, thanks for reaching out and for sending the photos in!
The 30-1/2" measurement you took seems to be about right. If the equalizers started binding up then they may either need some grease for the bolts, or they may have been tightened too much. The equalizer needs the freedom to move back and forth so the bolt won't be tightened down as hard as it can go.
You might also make sure that your shackle straps are the same length as the ones that came from the factory (center hole to center hole). If they are longer then that might be causing what you're seeing.
You definitely need to replace your 6K Leaf Spring(s) # e94SR though as it isn't safe to tow with it in that shape.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: equa~flex
- Search Results: trailer suspension parts
- Search Results: trailer leaf springs
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC145546
- Video: Complete Breakdown of the Bronze Bushing
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Video: A Closer Look at the Bronze Bushing
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: 3" Round Trailer U-Bolts 9/16" Diameter (Qty 2)
- Shop: U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Q&A: How to Determine the Correct Leaf Springs for a 2017 Grand Design 5th Wheel with 6,000lb. Axles
- Video: Let’s Check Out the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Search Results: double eye springs trailer leaf springs
- Search Results: 255 inch leaf springs
- Q&A: Do I Need To Remove Trailer Leaf Spring Before Measuring For Replacement?
- Q&A: How to Determine Replacement 6,000 lb Leaf Springs For Arctic Wolf 5th Wheel Trailer
- Q&A: Recommended Equalizer, Leaf Spring, and Hardware for 2005 Weekend Warrior Suspension System Upgrade
- Q&A: Replacement Leaf Springs For a 2022 Grand Design Reflection 28BH 5TH Wheel Camper
- Q&A: Distance Between Hangers with 26 Inch Leaf Springs
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Video: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles Review
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
on Trailer Leaf Springs
