Will The Curt Front Trailer Hitch Receivers C31014 and 31114 Fit a 1999 Ford F-350 At The Same Time?

Question

Question:

I currently have this hitch on my late 99 f350 Item 31114 Can I install part C31014? without removing 31114?

asked by: Jeff C

0

Expert Reply:

Since the Curt Front Trailer Hitch Receivers # C31014 and # 31114 both use different mounting locations you will be able to have both on your 1999 Ford F-350.

expert reply by: Bud M

0

Answer 1

The difference between the Curt Hitch #C31014 and Curt Hitch #31114 is that the #C31014 is designed for vehicles with blocker beams and the #31114 is designed for vehicles without the blocker beam. You will want to look under the front end of your…

view full answer...

Answer 2

Welcome back Paul! The Lionshead Aluminum Siberian Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Gunmetal Gray #LH78MR can definitely accept a Load Range G tire (like the Triangle ST235/80R16 Heavy-Duty Radial Tire - Load Range G #TR98VR).…

view full answer...

Answer 3

The front mount trailer hitch I recommend for your 2005 Ford F-350 is the Curt Front Mount Trailer Hitch Receiver part #31114 because it is made in the USA and currently our most cost effective option for a front mount hitch. I called Curt and they…

view full answer...

Answer 4

I do have a solution for you to install a front hitch on your 2003 Ford F-350 that will lead the OEM fog lights in tact, but you will need to confirm that your truck has the blocker beam behind the bumper (only found on 4wd versions of this truck, so…

view full answer...

Answer 5

Typically a trailer axle will have some camber in it - some bend - such that when it is not loaded the tops of the wheels bow outward slightly, with the outside edges of the tire treads making first contact with the ground. This allows that when the…

view full answer...

Answer 6

The Curt 16027 which we offer as part #C88KR adapter provides industry standard bed rails that are compatible with Reese, Curt, Demco, B&W, Valley and Husky 5th wheel hitches, among others.

view full answer...

Answer 7

Hello Kevin, thanks for reaching out. So, there are rail adapters that will fit into the puck system in your 2022 Ford F-450. The problem is that none of them will work with the B&W Patriot slider. For example we have the Curt Adapter Rails…

view full answer...

Answer 8

Congrats on the new truck! Yes, the Adapter Rails for Curt 5th Wheel Hitch item #C88KR will work with your Reese sliding hitch so long as it is set up to be used with industry standard 5th wheel rails. This adapter will drop right down inside the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Will The Curt Front Trailer Hitch Receivers C31014 and 31114 Fit a 1999 Ford F-350 At The Same Time?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching