Replacement Bolt And Nut For A Demco Kar Kaddy X Tow Dolly # DM9713093

Question

Question:

Looking for Demco Kar Kaddy hardware. 02434 Shoulder Bolt and 02587 Nylock nut

asked by: Stanley R

0

Expert Reply:

Hey Stanley,

The 02434 bolt and 02587 nylock nut for the Demco Kar Kaddy X Tow Dolly # DM9713093 aren't sold separately in a kit but can be easily purchased from a local hardware store or directly from Demco. The bolt has a 0.625 NC (thread size) x 4.50" (length) and is a grade 5 bolt with a hex head and the nylock nut also has a 0.625 NC (thread size).

expert reply by: Kevin C

0

Answer 1

Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…

view full answer...

Answer 2

Yes, you can attach the spare tire to your Demco Kar Kaddy SS Tow Dolly #DM9713045. You will need the Spare Tire Mount #DMRKSTM which mounts just behind the trailer jack.

view full answer...

Answer 3

I spoke with our tire and wheel expert (30+ years in the business) and he stated that Demco is rounding the bolt pattern up to 115mm. This often happens with companies that do not manufacturer the tires and wheels. Wheel #DM11574 is indeed the exact…

view full answer...

Answer 4

The Replacement Wheel #DM11574 is an exact replacement for the chrome wheel on the Demco Kar Kaddy SS Tow Dolly (9713045) so it would be considered an OEM piece. This also fits the Kar Kaddy 3 (9713046). If you also need to replace the tire then…

view full answer...

Answer 5

We offer correct replacement wheels for the Demco Kar Kaddy SS tow dolly so you do not need to worry about compatibility of an alternate part. Another wheel will not have the same +42mm offset that these correct wheels have. The replacement wheel has…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Bolt And Nut For A Demco Kar Kaddy X Tow Dolly # DM9713093

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching