Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ready for the road, this pre-mounted tire and wheel combo handles your gear with confidence. Aluminum wheel resists corrosion, and the low-profile tire helps boost fuel efficiency.
This combo comes pre-mounted and aired up, so it's ready to install right out of the box. Whether you're replacing a worn-out setup or prepping a new trailer, you'll save time and skip the hassle of separate mounting and inflation.
With a Load Range D rating, this tire offers strong hauling capacity for gear, tools, or recreational equipment. A great choice for steady performance without upsizing your setup.
This popular bolt pattern works with many common utility, cargo, and boat trailers. It's a reliable match for most small to mid-size trailers, so you can tow with confidence knowing it fits right.
The KR35 tread is engineered to help channel water away from the contact patch, improving grip and stability on wet pavement. Whether you're towing through rain or shine, it keeps your trailer tracking with confidence.
Radial construction helps reduce heat buildup and extend tread life. The included aluminum wheel features a corrosion-resistant white machined finish that stands up to weather, grime, and road wear.
If the tire fails under normal use in the first year, it gets replaced - simple as that. It's just one more way Kenda's helping you tow with confidence, mile after mile.
If the tire fails under normal use in the first year, Kenda will replace it. That's confidence you can count on, whether you're heading to the jobsite or the campsite.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer. Let's take a quick look at this Kenda Karrier KR35 ST205/75R14 load range C radial trailer tire on this 14-inch white AM0S aluminum wheel. Now, this is a ready-to-install trailer tire and wheel assembly. So this is going to come with the tire already mounted on this wheel. What that means for you is no trips to the tire shop. So you can bolt it on and go.
As I mentioned at the beginning of our time together, and as we have stamped here on our tire, this is an ST205/75R14 radial trailer tire, which is a pretty common trailer size tire, tire size for trailer, rather. This is built specifically for trailers. That's what the ST stands for before the tire size number. So this is designed to handle heavier loads and give you stable tracking behind your vehicle. This is a load range C tire, which means it has a six-ply rating, and it can carry up to 1,925 pounds at 60 psi.
So this is gonna be a solid choice for utility trailers, boat trailers, cargo trailers, and many campers. Just make sure your trailer's axle rating matches up. So when this tire is fully inflated, this is gonna have an overall diameter of about 26.3 inches. The section width is gonna be about eight inches. And the tire has a speed rating of N, meaning it's rated for speeds up to 87 miles per hour.
The tread on our tire is a Kenda KR35. That tread is designed for all-season use. It has channels that help move water away from the tire, which gives you better traction and control on those wet roads. And since this is a radial tire, this is gonna run cooler and wear more evenly than those bias-ply tires. So that usually translates to longer tire life and smoother towing.
Now, our wheel, measuring the diameter, bead seat to bead seat is 14 inches. The width of the wheel is 5 1/2 inches. This is an aluminum wheel with a powder-coated white finish, which in my opinion, is very attractive, especially with the machined parts here that give it kind of a silvery look to it there on the pattern. So this is gonna be a very attractive wheel. It's gonna hold up really well since this is aluminum, and especially with that powder coat, it's gonna do a great job of holding up against the elements this is gonna be constantly exposed to. Our bolt pattern is five-on-4 1/2 inches, which is one of the most common trailer bolt patterns out there. If your trailer has a five-lug hub with 4 1/2 inches between the bolt circles, this is gonna fit. If you need to figure out how to measure your bolt pattern, on this product page, a little bit lower down, we can walk you step-by-step through how you can measure your bolt pattern on your trailer to make sure that this is going to fit for you. This uses 1/2-inch-by-20 wheel bolts. This does not include a center cap, but if you decide to pick one up, you just wanna make sure that it will fit the pilot diameter of 3.19 inches. And this wheel itself is rated up to 2,200 pounds. So if you have any other questions about this great tire and wheel assembly for your trailer or anything else that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.
Ratings & Reviews

Kate F.
7/13/2026
New wheels look great Ed, thanks for including the picture! What body of water are you usually out playing on?

Gwendolyn Y.
9/18/2025
I absolutely love your camper, Brian! Where was the second picture taken?

Kate F.
4/15/2026
New wheels are looking sharp Rey! What body of water do you mainly get out on? I am in Missouri and enjoy my nice days out on the boat fishing for bass at Lake of the Ozarks and Mark Twain Lake.

James D.
5/27/2026
Brad, thanks for the great review. We’ll definitely be aiming for those 6 star reviews lol Thanks again for choosing etrailer!

Gwendolyn Y.
5/12/2026
Would absolutely love to see how everything looks once the wheels are on. Also, how custom are your custom lug nuts? is it just the length or is there something else to them?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Gwendolyn Y.
5/12/2026
It's almost like these wheels were made to me mounted on your trailer, Keith. Also good luck on the suspension upgrade once you tackle that job. What kind of upgrade were you looking at going, equalizer, shackle upgrade, or all of the above?