Recommended Surfboard Pads For A Thule TracRac Ladder Rack Crossbar

Question

Question:

looking for surf pads that will fit my trac rack crossbars that are 9 circumference

asked by: Matt V

0

Expert Reply:

Hi Matt,

The Thule SUP and Surfboard Pads # TH845000 are confirmed by Thule to fit the crossbars of a TracRac ladder rack. These pads have Velcro straps to quickly & easily install or remove them. I've attached a short video below where Adam will show you these pads on a typical roof rack.

expert reply by: Kevin C

0

Answer 1

Hey Dave, it's great to hear from you again! The CE Smith U-Bolt - Zinc-Plated Steel - 3" Long x 3-1/8" Wide x 7/16" Diameter #CE15252A you were looking at could work for if the dimensions match what you currently have. You…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

Hey Victor, yes the Long U-Bolt Kit part #RM33KT is a Roadmaster brand u-bolt kit. This does include nuts and washers as well.

view full answer...

Answer 6

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 7

Happy to help Chris, thanks for stopping by! The Goodyear Endurance ST205/75R14 Radial Tire with Eagle Aluminum Wheel #GY57QB is designed for 1/2"-20 wheel studs. If your 2023 Starcraft Autumn Ridge has the factory 1/2"-20 studs, I'd…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 10

Hey, Lance. The direction the springs are in doesn't matter. They can be to the front or to the rear of the axle and will perform the same either way. What kind of trailer are you working on?

view full answer...

Answer 11

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 12

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Recommended Surfboard Pads For A Thule TracRac Ladder Rack Crossbar

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching