Replacement Entry Step For a 2008 Coachmen Freedom Express 21QB

Question

Question:

Looking to buy replacement steps for 2008 coachman freedom express 21qb. RV repair guy pulled the steps off but wasnt able to put new ones on and now wont contact me again. I need to figure out what size those were. I can send photos. Should I measure to figure it out? Thanks

asked by: Thayne

0

Expert Reply:

Unfortunately Thayne, I have no way to look up what parts were installed on your 2008 Coachmen Freedom Express 21QB motorhome. So you are going to need to measure for the width of your step and the amount the step needs to drop. Here is a list of the different single steps we offer with the widths.

Kwikee Electric RV Step Complete Assembly - Single - 26 Series - 23-1/2" Wide # LC3711363
Kwikee Electric RV Step Complete Assembly - Single - 28 Series - 23-5/8" Wide # LC3747453
Kwikee Electric RV Step Complete Assembly - Single - 39 Series - 23-7/8" Wide # LC3724742
Kwikee Electric RV Step Complete Assembly - Single - 35 Series - 24" Wide # LC3691461
Kwikee Electric RV Step Complete Assembly - Single - 38 Series - 24" Wide # LC3723383
Kwikee Electric RV Step Complete Assembly - Single - 33 Series - 28-1/8" Wide # LC3722661
Kwikee Electric RV Step Complete Assembly - Single - 36 Series - 30" Wide # LC3756271

expert reply by: Bud M

0

Thayne

5/3/2024

Thank you for the quick reply. The steps are no longer there and I dont have them so what is should I measure where the steps were before to know which size I should buy? Thanks

Bud M.

5/3/2024

@Thayne You will want to measure the width of the step area which you will still likely be able to see below the door. Also you will want to measure how tall the side trim sits below the mounting area to ensure you get a step that will clear when they fold out. If unsure please take some pictures along with any measurements you can and send them to me to look over.

Thayne

5/3/2024

@BudM Thanks again. I went and measured. The mounting bolts are 22" wide. The depth (I took pictures) is 10" deep. The floor of the rv to ground is 14". Let me know if this is the info you need.

Bud M.

5/4/2024

@Thayne The Kwikee Electric RV Step Complete Assembly - Single - 28 Series - 23-5/8" Wide # LC3747453 has the mounting holes 22" wide and 6-1/2" deep. The Kwikee Electric RV Step Complete Assembly - Single - 35 Series - 24" Wide # LC3691461 and Kwikee Electric RV Step Complete Assembly - Single - 38 Series - 24" Wide # LC3723383 have the mounting holes 22" wide and 8" deep. With you having the 14" height the # LC3723383 would likely be the best option having an extended height of 6-1/8"

See All (5) Replies to Thayne ∨

Answer 1

Most powered RV steps are wired up so that if you turn on the RV the steps will automatically retract. If yours is extending instead that would indicate that this circuit is wired backwards. Do you know what steps you have?

view full answer...

Answer 2

The correct replacement step motor for a set of Kwikee 35 Series Electric RV Steps is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 3

I spoke with Lippert and they said the Kwikee 35 Series Electric RV 1-Step part #LC3691461 will be a direct replacement for the Coach Steps 725-0041. It will be a bolt-on install for the most part for the exception of changing out the door switch…

view full answer...

Answer 4

You can replace your Voyager AOM-711 monitor with the Voyager RV LCD Observation Monitor #VO34FR. The monitor will work with any standard voyager camera. For a replacement camera I recommend the Voyager Rear Camera #VCMS17B. You mentioned you are…

view full answer...

Answer 5

I just spoke with my rep at Voyager. The replacement monitor for the Voyager AOM 711 is going to be the Voyager RV LCD Observation Monitor - 7" Screen - 3 Video Inputs item #VO34FR.

view full answer...

Answer 6

I attached pictures that have all of the dimensions for the RearView Safety Flush Mount Bracket #RVS-421 that you referenced. Overall it's 7.875 inches wide and 6.125 inches tall.

view full answer...

Answer 7

The #VO344FR monitor you mentioned wouldn't be compatible, the correct replacement would be part #VOM719WP. I've linked you to a product description video. I hope that helps!

view full answer...

Answer 8

Hey Jerrie, the current wiring of your Voyager system could be reused so that you could replace the monitor you have. The correct monitor replacement would be the part #VO34FR.

view full answer...

Answer 9

Thanks for the picture Jim! You are correct the Voyager RV LCD Observation Monitor item #VO34FR is the correct replacement for your Voyager VOM-783. You will also need to use the ASA Electronics CRT to LCD Monitor Cable Adapter item #31100041.

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Entry Step For a 2008 Coachmen Freedom Express 21QB

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching