Approximate Install Time of Blue Ox Base Plates For 2022 Jeep Grand Cherokee WL

Question

Question:

Approximately how long did it take to remove the fascia, make the modifications then install the base plate, modify the facia and reinstall?

asked by: Wayne G

0

Expert Reply:

Hi Wayne,

The approximate install time on your 2022 Jeep Grand Cherokee WL is about 4 hours to install the Blue Ox Base Plate Kit # BLU98CR.

This includes the steps you mentioned, but I did want to note that the time can vary by quite a bit depending on who is doing it, their experience level, comfort and access to the tools, etc; so that's really just a guideline.

expert reply by: Kyle S

0

Wayne G.

5/3/2024

Agreed, experience would likely be a significant factor.

Answer 1

To flat tow your 2023 Jeep Grand Cherokee Overland with a Ready Brute Tow Bar, you will need to use the Adapter Brackets for Ready Brute Elite Tow Bars item #BX88297 and one of the following base plates depending on whether or not your Jeep has the…

view full answer...

Answer 2

There are 2 different Blue Ox base plate kits that will fit your 2024 Jeep Grand Cherokee Summit: - With Tow Hooks #BLU68CR - Without Tow Hooks #BLU98CR According to my research your Jeep comes with he tow hooks so you'll need the first kit.

view full answer...

Answer 3

There are several base kit options for a 2022 Jeep Grand Cherokee depending on your body style and options. I have attached these for you below WL (New Body): Blue Ox Base Plate Kit part #BLU39XR with Tow Hooks Blue Ox Base Plate Kit part #BLU98CR…

view full answer...

Answer 4

Hi Rodney, Baseplates for 2024 Jeep Grand Cherokee's are split up by models with lower air shutters and tow hooks. If your model doesn't have tow hooks or lower air shutters then you'll need part #BLU98CR. If you have tow hooks but no…

view full answer...

Answer 5

The factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which…

view full answer...

Answer 6

Hey Bryan, welcome back. For a professional install the etrailer Invisible Base Plate Kit item #e66GV takes right at 3 hours. For a DIY install closer to 6 hours depending on experience level and access to a lift. Most of the front end and some of…

view full answer...

Answer 7

I would be happy to John and congrats on the new Jeep and motorhome! There are two different kinds of baseplates for the 2025 Jeep Grand Cherokee Limited Summit model. Which one you need is going to depend on whether or not your Jeep has tow hooks on…

view full answer...

Answer 8

Hey Walter, I checked with Curt and the RVI Series 4 part #RVI44FR that you referenced showing a Code 4 is related to exposure to cold weather and it's causing some circuit board issues. The solution is to let it sit indoors to warm up for 15 to…

view full answer...

Answer 9

Hey Jerry. There's no database that shows me what parts are on your 2015 Road King boat trailer and their website wasn't much help either. There's way too many options to take an educated guess. The DeeMaxx Disc Brake Kit item #DE82FR you…

view full answer...

Answer 10

Hi Jerrod; the correct wiring harness for your 2025 Hyundai Santa Fe HTRAC AWD is the Curt T-Connector Vehicle Wiring Harness #C29ZV you were looking at. This will plug into the connection points in your rear cargo area and then a hot lead will run…

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Approximate Install Time of Blue Ox Base Plates For 2022 Jeep Grand Cherokee WL

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching