Will A BedRug Bed Liner Prevent Installation Of A Trolley Truck Bed Slide Out Tray # TR87VR

Question

Question:

08 F-350 6’ 9” bed length. Just curious if this would be compatible with the BedRug?

asked by: David W

0

Expert Reply:

Hey David,

As long as your BedRug bed liner doesn't block the factory anchor points you'll be able to install the Truck Trolley Truck Bed Slide Out Tray # TR87VR. If it does you can just cut out the liner around the anchor points to make it work.

expert reply by: Kevin C

0

Answer 1

Hey Daniel, the Truck Trolley Truck Bed Slide Out Tray #TR87VR that you referenced does not require your truck to have a bed mat or bed liner. It will work just fine on a bare metal truck bed like you have. What will you use this for?

view full answer...

Answer 2

The big differences between a Class IV and a Class V hitch are the capacities and the opening size. Class IV is going to be a 2 inch hitch opening that has tongue weights typically up to 1,200 lbs and total trailer weight of 12,000 lbs. For a Class V…

view full answer...

Answer 3

The overall weight capacity of the Truck Trolley Truck Bed Slide Out Tray #TR87VR is 300 lbs. This is the same as the capacity when it is in the truck bed. When you slide it out and it overhangs the tailgate the capacity is 100 lbs.

view full answer...

Answer 4

The overall height including the cap for the DeeZee Truck Bed Auxiliary Tank #DZ91752X that you referenced is 22-1/2 inches. We've found that it typically fits pretty easily under tonneau covers like what you see in the attached picture, but you…

view full answer...

Answer 5

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 6

Hey Gary, thanks for reaching out, and thanks for your patience as I looked into this. I spoke with MouseBlocker directly and they said as long as you're connected to shore power then your best bet is to use the 1000x #MB54FR on the inside of the…

view full answer...

Answer 7

Jordan, yes, the 360x #MB64FR is designed for larger enclosed spaces like barns and pole sheds. It throws ultrasonic sound in all directions, covers up to 1,000 sq. ft., and even has a weather-resistant case for barn environments. For extra…

view full answer...

Answer 8

Hi Donald! The MouseBlocker PROx Plug In Electronic Rodent Deterrent - 110V AC #MB34FR is rated to protect up to 400 square feet. However, it is mostly intended for direct protection and not necessarily a large area. Think vehicles, trailers, and…

view full answer...

Answer 9

Hey Tyler, thanks for reaching out! Yes, the Fas-Top Traveler Roll-up Tonneau & Soft Truck Topper Combo #FT38RV is confirmed to fit the standard bed on your 2020 Chevy Silverado 3500. Do you plan on mainly using it as a tonneau cover or as the…

view full answer...

Answer 10

Hello George, thanks for reaching out. According to my research, the Norcold RV Mini Fridge w/ Built-In Freezer #NC37VR uses a Sawafuji brand compressor.

view full answer...

Answer 11

Hi Steve, great question! The bolt spread dimensions on scissor jacks aren’t universal, they can vary a bit depending on the brand and capacity. Most standard RV scissor jacks use a mounting plate that’s roughly 3-1/4" wide with bolt holes…

view full answer...

Answer 12

Truck Trolley test fit the part #TR87VR on the 2023 Ford F-150 and found that it does fit the 5-1/2 foot and 6-1/2 foot beds so it would for sure fit yours. We also had the chance to test fit it on a 2020 model and found that it fit and worked great.…

view full answer...

Will A BedRug Bed Liner Prevent Installation Of A Trolley Truck Bed Slide Out Tray # TR87VR

Product Page this Question was Asked From

Continue Researching