Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch

Updated 04/25/2024 | Published 04/24/2024

Products Featured in This Question

Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop

(163)

$228.32

Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop

(290)

$202.89

Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop

(54)

$250.25

Question:

I recently upgraded my towing vehicle from a RAM 1500 to a RAM 2500. The hitch receiver is now 2.5” vs 2” on my old truck. My current Reese Weight distribution hitch is a 2” shank. I have the sleeve adapter but its sloppy and theres play. Can i use any 2.5” shank and bolt on my weight distribution and ball to it? Some say universal. Thanka.

asked by: Joe G

Expert Reply:

Hi Joe,

Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the max rise/drops:

- Max 7" Rise, 3" Drop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch # EQ90-02-4700

- Max 10" Rise, 6" Drop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch # EQ90-02-4900

- Max 13" Rise, 9" Drop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch # EQ94FR

expert reply by: Kyle S

Joe G.

4/24/2024

Ok my concern was the newer shank not fitting the other components and ball that bolt on but they seem to be universal. Thank you.

Joe G.

4/24/2024

Also will curt shanks or other brands fit or just equilizer?

Kyle S.

4/24/2024

@JoeG Yep, the Curt 2-1/2" shanks will work: - Max 13" Rise or 9-1/4" Drop: Curt Weight Distribution Shank for 2.5" Hitches # C17132 - Max 6-3/4" Rise or 3-1/4" Drop: Curt Weight Distribution Shank for 2.5" Hitches # C17131

Joe G.

4/25/2024

@KyleS thank you. Is there a big difference between brands?

Kyle S.

4/25/2024

@JoeG So I don't think I'd qualify them as having a "big" difference, but in terms of quality, Equal-i-zer just doesn't disappoint. Also, I can tell you the Curt is made overseas while the Equal-i-zer is made in the USA. So while I would go with Equal-i-zer because I trust them the most, the Curt isn't a bad product.