Will The Hayes Energize III+ Fit On a 1995 Chevrolet C3500 Pickup?

Question

Question:

Will this work with my 1995 C3500?

asked by: Wade

0

Expert Reply:

Yes, you are able to use the Hayes Energize III+ Trailer Brake Controller # HA81742B on your 1995 Chevrolet C3500 pickup. You will need the Pigtail # HA81789-HBC to connect to any wiring you may already have to go to a 7-way. If you do not already have a 7-Way the Kit # ETBC7 will connect to a 4-Way # C55315.

expert reply by: Bud M

0

Wade R.

4/11/2024

Thanks for the quick response!! The answer was spot on and I have ordered the parts. Thank!!!

Bud M.

4/13/2024

@WadeR You're Welcome!

Answer 1

If you cannot access the wire going to the hot side of your brake light switch you may be able to access the brake pedal switch signal at an electrical box located near the emergency brake pedal. If you can find in this box a terminal(s) labelled NAT…

view full answer...

Answer 2

Hello Wendell. For your 1991 GMC Pickup I recommend the Tekonsha Prodigy P3 #90195 brake controller. It is durable and reliable. It has large, accessible buttons and an LCD display which make it very easy to use. Keep in mind that you will need to…

view full answer...

Answer 3

If the 4-way trailer connector you have on the back of your 1994 Chevrolet truck needs to be replaced use Curt #C55315. There will be a connector under the rear of the truck on the driver's side to install the harness. Once you have the 4-way…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will The Hayes Energize III+ Fit On a 1995 Chevrolet C3500 Pickup?

Products Featured in This Question

Continue Researching