Will The Correct Track Trailer Alignment and Lift Kit # RR23QX Work On A 2023 Dutchmen 2533RDF

Question

Question:

Will this lift kit work on my 2023 Dutchmen 2533RDF? I need to raise it 2 inches to get rear stabilizers more ground space when traveling.

asked by: David S

0

Hanger and Equalizer
(click to enlarge)

Axle and Spring Hanger
(click to enlarge)

landing Gear Clearance
(click to enlarge)

Expert Reply:

Hello David. The Correct Track Trailer Alignment and Lift Kit # RR23QX is definitely going to be your best bet for lifting your 2023 Dutchmen 2533RDF. That said, this kit is not made for any one specific camper, so we generally would want you to check and confirm fitment.

Basically, you will want to be sure that there is at least 2-5/8" from the I-beam to the spring mounting hole on the hanger. Based on your picture it looks like there is definitely enough room, but I am just eyeballing. If you can confirm that measurement, then this kit will be exactly what you need to get 2-1/4" of lift.

expert reply by: Jesse M

0

David

4/9/2024

Yes Sir there is room. I'll get around to ordering end of Month. Is there a video on installing this kit?

Jesse M.

4/10/2024

@David I am afraid not. It looks like we have never had the chance to install one of these kits at our shop here. You will find the manufacturer instructions linked below. That will be the best resource we can offer for installation. From what I gather, these Correct Track kit are best installed professionally.

Answer 1

It appears you may have installed shackle straps which are longer than what you may have had. It appears your straps are either 3-1/8" #TRSL313 or 3-1/2" #TRSL350 and you likely only need a 2-1/4" #TRSL225. This would move the mounting…

view full answer...

Answer 2

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 3

We have the tandem trailer axle lift kit part #RR23QX which comes with everything needed to lift your tandem axle trailer with Dexter brakes 2-1/4 inches like you are wanting.

view full answer...

Answer 4

Since your axles are already flipped you don't have many options for a lift. Although it is not going to get you 4" you can use the Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX. This will get you an additional…

view full answer...

Answer 5

We have a solution for you but because your axle is already over slung and you have taller hangers in place, we are limited in options. From the images you forwarded, you have a T44 axle. I recommend the Correct Track Trailer Alignment and Lift Kit…

view full answer...

Answer 6

As your outer hangers already have a second set of mounting holes for the leaf springs that will raise your trailer you will only need to concern yourself with the center hanger. If the center hanger is also taller with a second hole that will raise…

view full answer...

Answer 7

Hey Phil you can send those pictures to the email you receive this response and I will be happy to take a look at them. There's only going to be a couple of ways to lift your 2019 Keystone Cougar 29RKS though and it's going to be determined…

view full answer...

Answer 8

This is definitely something that has been an issue for newer trucks like your 2022 Ram 2500. Pretty much every truck manufacturer started making their trucks sit a bit higher a few years ago which has really changed the game for 5th wheel towing. If…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Will The Correct Track Trailer Alignment and Lift Kit # RR23QX Work On A 2023 Dutchmen 2533RDF

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching