Parts Needed to Lift Tandem Axle Cougar Fifth Wheel 2 inches

Question

Question:

Need to gain 2 inches on my Dexter D52 axles. The springs are currently on top of the axle. Was hoping to add 2 inch blocks between axle and springs

asked by: Christopher

0

Expert Reply:

We have the tandem trailer axle lift kit part # RR23QX which comes with everything needed to lift your tandem axle trailer with Dexter brakes 2-1/4 inches like you are wanting.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have a solution for you but because your axle is already over slung and you have taller hangers in place, we are limited in options. From the images you forwarded, you have a T44 axle. I recommend the Correct Track Trailer Alignment and Lift Kit…

view full answer...

Answer 2

Hello David. The Correct Track Trailer Alignment and Lift Kit #RR23QX is definitely going to be your best bet for lifting your 2023 Dutchmen 2533RDF. That said, this kit is not made for any one specific camper, so we generally would want you to check…

view full answer...

Answer 3

This is definitely something that has been an issue for newer trucks like your 2022 Ram 2500. Pretty much every truck manufacturer started making their trucks sit a bit higher a few years ago which has really changed the game for 5th wheel towing. If…

view full answer...

Answer 4

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 5

Hey Phil you can send those pictures to the email you receive this response and I will be happy to take a look at them. There's only going to be a couple of ways to lift your 2019 Keystone Cougar 29RKS though and it's going to be determined…

view full answer...

Answer 6

As your outer hangers already have a second set of mounting holes for the leaf springs that will raise your trailer you will only need to concern yourself with the center hanger. If the center hanger is also taller with a second hole that will raise…

view full answer...

Answer 7

It appears you may have installed shackle straps which are longer than what you may have had. It appears your straps are either 3-1/8" #TRSL313 or 3-1/2" #TRSL350 and you likely only need a 2-1/4" #TRSL225. This would move the mounting…

view full answer...

Answer 8

Since your axles are already flipped you don't have many options for a lift. Although it is not going to get you 4" you can use the Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX. This will get you an additional…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...