2021 Hyundai Palisade Plug-In Adapter to Fit With Curt Venturer Brake Controller

Question

Question:

I have a Curt Venturer brake controller model# cme-L00046. Can this be used on a 2021 Hyundai Palisade and is there a plug in adapter

asked by: Randall P

0

Expert Reply:

Hey Randall, thanks for reaching out!

Both the (discontinued) Curt Venturer 51110 and the Venturer NEXT # C74VV are compatible with your 2021 Hyundai Palisade, and will plug directly into your OEM wiring by using the Wiring Adapter # C77BR.

expert reply by: Jon G

0

Answer 1

Hey Kent, so we do have hitches that fit your 2021 Hyundai Palisade which were rated for use with weight distribution systems like with our part #e95ZR. Your frame design will be totally fine. For the weight of your trailer the Reese Dual Cam Weight…

view full answer...

Answer 2

I checked out the owner's manual for a 2023 Hyundai Palisade and there were no exclusions for using a weight distribution system. Therefore, so long as you have a trailer hitch rated for this, like the etrailer Trailer Hitch Receiver part #e95ZR…

view full answer...

Answer 3

Congrats on the new vehicle! To add a hitch with a 2" receiver to your 2021 Kia Telluride you will want the etrailer Hitch item #e45ZR. This hitch is custom fit and is guaranteed to bolt to your Kia with included hardware. I really like this…

view full answer...

Answer 4

You will be able to install the Curt Venturer NEXT Trailer Brake Controller #C74VV on your 2023 Hyundai Santa Cruz with the Pigtail #C77BR. As you only have a 4-way flat you will need the Curt T-Connector Vehicle Wiring Harness #C68JR to install a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

2021 Hyundai Palisade Plug-In Adapter to Fit With Curt Venturer Brake Controller

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching