Weight Distribution Recommendation for 6,000 lb Trailer

Question

Question:

We are purchasing a trailer weighing approx 6000 lbs. Which blue ox weight distribution sway pro would i need?

asked by: Frank

0

Expert Reply:

Hey Frank, so the Blue Ox SwayPro weight distribution system you'd want is the part # BXW0750 which has a tongue weight range that matches what a 6,000 lb trailer would have.

expert reply by: Jameson C

0

Answer 1

For your Cobalt boat and trailer, I recommend you go with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion #FA92-00-0800. This system will give you a stronger system that will also allow you greater ground clearance. This system…

view full answer...

Answer 2

There are a few different brands when it comes to solar power so I recommend finding out exactly which brand of equipment is installed on your RV. You may have an 2-pin XLR style plug in on your camper which would allow you to easily plug in the Go…

view full answer...

Answer 3

Since the hitches that fit your 2020 Dodge Durango R/T are rated for use with weight distribution you can use a kit like the Fastway e2 part #FA92-00-0800 like you mentioned which would do the best job at reducing sag when towing. This also helps…

view full answer...

Answer 4

I appreciate the detailed information concerning your 1999 Grand Cherokee and 2017 Palomini. With a loaded hitch weight of 450 lbs and 200 lbs of cargo behind your axle, your total tongue weight is going to be roughly 650 lbs. With this in mind, the…

view full answer...

Answer 5

Yes, all hitches have a tongue weight and towing capacity weight rating for standard towing. However, some hitches additionally have adjusted tongue weight and towing capacity weight ratings when used in conjunction with a weight distribution hitch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 12

Welcome back Belinda! The Andersen Weight Distribution Hitch w Sway Control - 4" Drop/Rise - 16K GTW, 1.6K TW #AN33VR may work for towing your Grand Design Imagine XLS23LDE with your F-250. However, when we tested it a while back, we didn't…

view full answer...

Weight Distribution Recommendation for 6,000 lb Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching