Box

Question

Question:

When folded, could this item be stored inside my Yakima SkyBox 16 Carbonite? Will it fit?

asked by: Chris C

0

Expert Reply:

It will not, no.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

You can determine if you have a tow package by reaching out to a Ford dealer or by checking the undercarriage of Explorer. If it does have the tow package there will be a trailer hitch receiver and either a 4-pole or 7-way wiring harness visible as…

view full answer...

Answer 10

If your 2017 Ford Explorer has the factory prep towing package installed, then you might have a brake controller plug-in wiring on the vehicle to connect your brake controller. However, not all models with the tow package had the wiring installed and…

view full answer...

Answer 11

I have a solution for you, but the Yakima HangOver #Y02484 is designed only for bikes with suspension forks. Since you'll be carrying a couple different types of bikes, I recommend using a platform rack like the Saris SuperClamp EX Bike Rack for…

view full answer...

Box

Product Page this Question was Asked From

Continue Researching