Will the Gen-Y Adjustable Ball Mount Work With a 2022 Acura MDX
Updated 03/18/2024 | Published 03/17/2024
Question:
I have a 22 MDX with a very tight clearance between the back of the hitch receiver and full-size spare tire. The 2inch depth of this shank from the hitch pin to back of the shank is perfect. Can I use this shank in the Acura OEM receiver? The trailer being towed has a 3000# gvwr. I have a Reese weight distribution shank right now.
asked by: Michael C
0
Current Shank for a 2022 Acura MDX
(click to enlarge)
(click to enlarge)
Expert Reply:
Yeah you absolutely can, Michael. The shank # 325-GH-0352 will fit into any 2" receiver so assuming your Acura's OEM receiver is the same size you could use it.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- Fits 2 Inch Hitch
- Gen-Y Hitch
more information >
Continue Researching
- Q&A: Distance From Top of Curt Shank to Center of Topmost Adjustment Hole
- Q&A: Comparing Reese Strait-Line and Curt TruTrack Weight Distribution Systems for 5,800 Pound Trailer
- Q&A: Comparing the Equal-i-zer Hitch Vs The Reese Wieght Distribution Hitch With Dual Cam Sway Control
- Q&A: Comparing Aluma-Tow Adjustable Ball Mount To B&W, etrailer, and Trimax
- Q&A: Best Way To Clear Trailer Jack with Lowered Tailgate on 2016 RAM 1500 Using Weight Distribution
- Q&A: Are Curt, Fastway, and Husky Weight Distribution Shanks the Same
- Q&A: Best Weight Distribution Hitch For Pulling 2016 Pacific Coach Works 16rb With 2019 Toyota Tacoma
- Article: Trailer Wiring Diagrams
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: 5 Things to Know About Weight Distribution Hitches
Michael C.
3/18/2024
The length from the hitch pin to leading edge on my current all-Reese WD setup is 1/2 inch longer than using this GenY shank with the same Reese WD head. Would I need to find trunnion bars that are 1/2" longer, or would that difference not be a big deal? Thank you!