Replacement Hub/Drum and Brake Assemblies for Dexter 12k Axle
Updated 03/14/2024 | Published 03/13/2024
Products Featured in This Question
Question:
Will Item # 8-214-5 work for a Dexter 12k dually axle? If not, do you have one that will? We will also need brake shoes/spring kit, wheel cylinders and seals if available. And Im assuming no one sells the spindle? Thanks.
asked by: Mike T
Expert Reply:
Hey Mike, we have a similar hub that does fit a 12k Dexter dually hub with the part # 8-214-8UC1. The 10k part # 8-214-5 does have same bearings and seal so it would fit technically but it would not be weight rated for a 12k axle. For a drum you would then want the part # DX34XR and brake assemblies part # AKEBRK-12.
However, we do not carry a 12k spindle at this time.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- 395S / 387A
- Standard Grade
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: 12k brake drum
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 12K
- Shop: Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Search Results: trailer brakes
- Shop: etrailer Hydraulic Trailer Brakes - Free Backing - E-Coat - 12" - Left/Right - 5.2K to 7K
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Electric Trailer Brakes for Trailer With 24,000 lb GVWR
- Search Results: dexter 12k axle
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 12,000 lbs
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 12,000 lbs
- Shop: Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
- Search Results: 010~056~00
- Q&A: How Does Dexter 12k Oil Seal Install in Hub
- Q&A: Replacement Hub and Drum for Dexter 10K Axles with 008-214-05 Hubs
- Q&A: Trailer Wheel Compatibility with 5/8 Inch Bolts on Dexter 10,000 lb Axle
- Search Results: 9~44
- Search Results: 009~028~01
- Search Results: akebrk~12
- Q&A: Are The Dexter Trailer Hub and Drum Assembly # DX68QR Sold as a Set Or Individual Quantity?
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Ladder Rack
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: How to Choose a Trailer Brake Controller
on Trailer Hubs and Drums
Mike T.
3/14/2024
Thanks Jameson. We don't have straight electric brakes, we have electric over hydraulic. I found these shoes but doesn't seem to come with a spring kit. Do you have a spring kit for it and/or a complete setup? BP04-375 & BP04-365 are all I could find. And would these be the correct wheel cylinders? T1718600 & T1718500